I cant use the wii remote ,or the Wii remote dose not respond properly?
1.Is the player LED on the Wii remote lit?
Press one of the buttons on the Wii remote (not the POWER button). If the player LED does not turn on, make sure that the batteries are inserted correctly.if the LED still wont turn on replace both of the batteries.
2.Have you synchronized the Wii remote with this Wii u console?
Press ths SYNC button on the Wii u console amd follow the instructions on the screen.
3.Are youreither too close or too far from the sensor bar?
Always play from 3-10(1-3m) from the sensor bar.if this does not resolve the issue.adjust the sensor bar sensitivity in system settings on the Wii U menu,adjust sensitivity.
4. Is there any obstruction in the front of the sensor bar?
Remove objects that might be blocking the singnals between the Wii remote and sensor bar.
5. Is the sensor bar installed correctly?
Make sure that the sensor bar is place correctly, make sure the sensor bar plug is fully inserted into the connector on the console.
6. Are there any play conditions that could interfere with the operation of the remote?
If you think any of the following conditions are affecting the operation of the remote, try removing or reducing the source of interference:
1).Bright light sources, includeing sunlight,behind or near the tv,shining toward the remote or reflecting off the tv screen
2).Highly reflective surfaces near the sensor bar
3).Sources of infrared light in the gameplay area such as electric, propane or kerosene heaters,flames from fireplaces or candles,and stoves or other sources of heat
4). Radio frequency interference may cause the Wii remote to work erratically.check for and move or turn off wireless devices such as cordless phone,wireless computer key boards or mice,or other similar devices
7.Is the Wii remote pointed at the sencor bar?
Point the Wii remote at the front of the sensor bar when using.