Feature
●AudioQuest 2m Tower 3.5mm - 2xRCA. Connector 1: 3.5 mm
●Connector 2: 2 x RCA
●Cable material: Copper
●Connector contacts plating: Gold
●Cable length: 2 m
●Security algorithms:
Description
Golden Tower Analog Audio Interconnect Cable Mini to RCA
All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of todays connections, including 3.5mm (male or female), DIN, and RCA. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3" (7.6cm) apart, please consider models from our Rivers or Elements Series.
Features
|
|
|
|
|
|---|---|---|---|
ASYMMETRICAL DOUBLE-BALANCED GEOMETRYPurpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. |
METAL-LAYER NOISE-DISSIPATIONIts easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipments ground reference requires AQs Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground. |
COLD-WELDED, GOLD-PLATED TERMINATIONSThis plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability. |
SOLID LONG-GRAIN COPPER (LGC) CONDUCTORSSolid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. |
