Feature(may vary by option.)
●Wide Application: Submersible pump is used for all kinds of fish tank, pool, as the power device of water circulation. Suitable for miniature fountain, handicraft, bonsai fountain, aquarium.
●Easy Disassembly and Maintenance: Longer service life of this submersible pump, easy disassembly and maintenance.
●Low Power Consumption and Noise: This submersible pump is with low noise so will be quiet running and low power consumption. 2500L/H and 50W.
●Balanced Rotating Speed: Our submersible water pump is with reliable operation and with balanced rotating speed.
●ABS Material: This water submersible pump is made of ABS material and with excellent workmanship. Wear resistance is great.
[US Plug 110 u2011120V]
Description
Specification:
Item Type: Side Suction Submersible Pump
Model: EB 307
Material: ABS
Power: 50W
H- Maximum: Approx. 2.5m / 8.2ft
Maximum Flowing: 2500L/H
Water Depth: 100cm(39in)
Diameter of Connection Port: Approx. 19mm / 0.75in, 22mm / 0.87in, 25mm / 0.98in
Package List:
1 x Submersible Pump
3 x Adapter
4 x Suction Cup Foot
1 x Instruction Manual
Note:
A. Safety instructions
1. The submersible pump should work within the voltage and frequency range marked on the submersible pump before working, please do not use voltage and frequency other than those specified.
2. Do not work the submersible pump in flammable and corrosive liquids, only work in refreshing and sea water.
3. The submersible pump must be safely immersed in water when working, not exposed to water, otherwise it will cause permanent damage to the submersible pump.
4. Submersible pumps should preferably not work in water above 35°C or below freezing point, as this can cause damage to the pump.
5. If the submersible pump outlet power is damaged, do not continue to use the pump to ensure safety.
6. When the amphibious pump is used far from the water, the joint should be connected tightly and the air needs to be evacuated by water injection.
B. Precautions for operation
1. Cut off the power supply when performing maintenance on the submersible pump.
2. Do not let the submersible pump idle or leave the water face for more than 5 minutes.
3. Do not pull the power cord directly to lift the submersible pump, otherwise the power cord may be pulled out.
4. Disconnect the power cord before removing the submersible pump from the water to ensure safety.
The maximum diving depth is 1 m for submersible pumps.