Smoothly separate bearings and remove gears without damage with the ABN Gear Puller and Bearing Splitter 14-Piece Set ? Heavy-Duty Kit ? Vehicle Gear, Pulley, Steering Wheel, Ball Bearing.
Contents:
- 2-piece 9/32"-3" bearing separator
- 2-piece 5-1/2" long M12 thread bolts for bearing separator with nuts and washers
- 2-piece 3/8"-M16 thread 6" long pawls with nuts
- 4-piece 3/8"-M16 x 5/16"-M18” thread 6-3/4" long connecting bolts with nuts
- 1-piece 9/16"-M10 thread 5-1/2" long push rod
- 1 bracket
- 1 cone head for push rod
- 1 flat head for push rod
- 1 carrying case
There are several uses for the puller arms and extensions. If you want to remove a bearing, assemble the big silver plate below it and screw the black hex-shaped arms into the silver plate. Slide the other end of the arms through the H-shaped tool, secure it with nuts and washers, and put the big black screw through the H-shape. Tighten the big screw until it touches the shaft where the bearing rides until you hear a "pop" or click and the bearing will start to slide off. The silver hooks can be used to grab the sides of a bearing or pulley when you cant reach the silver plate beneath it.