The F92G axle by /Dexter Marine manufacturer part number 49547 is a small capacity axle with a galvanized finish and stainless wear rings pressed on the spindles. A predrilled 5/16 drain hole purges water from the inner beam after submersion. The lube spindles features zerk fittings that will allow simple and efficient bearing packing and repacking when used with a grease gun and EZ Lube grease caps.Features. Hot dipped galvanized steel beam to combat corrosion. Galvanized axles will last much longer than painted ones and are perfect for marine applications. Features a stainless steel wear sleeve on either spindle. Slight camber present in the welds of the spindles. Includes 2 castellated nuts, 2 washers, and 2 cotter pins. EZ Lube spindle design features a zerk fitting at the ends of both spindles for easy bearing lubrication. Flangeless. Predrilled 5/16 drain hole. Should not be used with wheels exceeding 13Specifications. Size 2 in.. Capacity 2,000 lbs. Hub Face Measurement 87. Overall Length 91.5. Beam 2 x 2 Square. Spring Center Range 72 77. Spindle 1.1/16 straight. Country of Origin United States