Description:
JAN 5654W tubes is a great upgrade for Little Dot and Little Bear amps! This tube is a direct replacement for 7-Pin 6J1 / 6J1P / 6J1P-EB / 6Zh1P-EV / 6AK5 / 6AK5W / EF95 tubes. This tube is very high quality and will last for a long time.
We subject these tubes to multiple test cycles and plate voltages to determine stability. In addition to ip, Gm, leakage/gas, noise and life testing, the matched tubes undergo a final audio sound check to make certain they are indeed audio quality. Tubes that show the slightest abnormality are rejected.
Technical characteristics and electrical parameters of the JAN 5654W tubes : Filament voltage 6.3 ± 0.6 V Filament current 170 ± 15 mA Anode voltage rated (constant) 120 V Anode voltage limit (constant) 200 V Anode current 7.35 ± 2.35 mA Cathode current limit 20 mA The reverse current of the grid of the first is not more than 0.1 μA The grid voltage is the second rated (constant) 120 V Grid voltage second limiting (constant) 150 V Power dissipated by the anode, maximum 1.8 W The power dissipated by the second grid.
The limit of 0.55 W Voltage between cathode and heater limit (constant) 120 V Slope 5.15 ± 1.25 mA / V Cutoff voltage of the anode current (at anode current of not more than 5 μA) no more than -15 V The cutoff voltage of the electronic current of the grid is the first -1.5 V Internal resistance 0.1-1.1 MΩ Equivalent resistance of intra-tube noise no more than 3.7 kOhm Input impedance at a frequency of 60 MHz 12-25 kOhm Resistance in the cathode circuit for 200 bias auto bias The resistance in the first circuit is the limit 1 MΩ Input Capacitance 3.5-4.7 pF Output Capacitance 1.9-2.8 pF Capacitance through passage no more than 0,035 pF The capacity of the cathode-heater is not more than 4.6 pF Miniature glass
NOTE:
AMPLIFIER DAMAGE CAN OCCUR IF YOU SUBSTITUTE THE WRONG TYPE OF TUBE. 5654W tubes should only be used to directly replace 7-Pin 6J1 / 6J1P / 6J1P-EB / 6Zh1P