Feature

●Fast & Accurate: The ultrasonic thickness gauge measuring ranges from 0.039 to 8.85 in/1 to 225mm, Resolution: 0.01mm. you can get accurate (±0.5%H+0.05mm) readings in inch or mm in 0.5 seconds.
●Adjustable Sound Velocity: You can be easily changed sound velocity from 1000 to 9999m/s to get the most accurate results. it continually displays/updates average, min/max, and number of readings while measuring, and also you can set a high/low thickness limit alarm.
●Multi-Functional: 2.4″ HD color screen display with backlit & 5 selectable color display, storage up to 500 data, statistic view, calibration, auto-off, and restores factory settings function.
●Versatile Uses: Widely used for measuring Metal and Nonmetal materials, Steel, Aluminum, Copper, Brass, Zinc, Plastic, PVC, Glass, Ceramics, Pipes and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces.
●What You Get: 1x Digital ultrasonic thickness gauge, 1x Probe 5MHz, Built-in metal calibration block, 1x USB Cable, 3x Rechargeable Battery, 1x Operation Manual, and 12 months warranty, and a friendly 24/7 professional customer service team.


Description

ultrasonic thickness gauge meter tester measurement deviceultrasonic thickness gauge meter tester measurement device
metal ultrasonic thickness gaugemetal ultrasonic thickness gauge

Technical Parameters

Measuring range 0.039 to 8.858 inch(1mm to 225mm)
Data storage Store up to 500 readings in 5 groups and recall
Operation frequency 5MHz
Measurement error ±(0.5%H+0.05)mm
Lower limit of pipe measure Φ20x3mm/ 0.118inch (steel)
Adjustment range of soundspeed 1000～9999m/s.user can select 12 kinds of the preset sound velocity values among various materials,what’s more, sound speed also is customizable based on your different application
Battery The ultrasonic thickness measuring instruments is equipped with 3pcs Ni-MH AAA 800mAh 1.2V rechargeable batteries and packed with 5V 1A USB cable recharger .Please do not install non-rechargeable batteries
Measurement interface display Statistic view(Min/Max/Avg/High/Low value),battery power status,selected storage method(off/on),data unit(inch/mm)
Automatic shutdown time 2, 5, 10, 30 minutes / never
Backlight selection Blue, orange, green, purple, gray
Restore factory setting Yes/No
Probe protection The surface of the probe is acryl resin, which is sensitive to grooves on rough surface and should be handled with care in use. When measuring rough surface, please reduce the slide of probe on the surface; the surface temperature of the measured object should not exceed 60 °C (high temperature probe for high temperature surface), otherwise the probe will fail to work; oil and dust on the surface will gradually age the cable in probe, and cause it to break. So clean the dirt on cable after use.
Cleaning of calibration block When using random test sample to calibrate the ultrasonic thickness gauge, apply coupling agent to prevent it from rusting. After finishing,please wipe coupling agent off test sample. Do not drip sweat on test sample when the temperature is high. If it is not in use for a long time, apply a little fat oil on the surface of random test sample (all kinds of anti-rust oil will also do). When using it again, please wipe anti-rust oil off test sample first and then start to perform.

What can be measured?

It is possible to measure virtually any engineering material to a certain degree of accuracy, including metals, ceramics, glass, polymers, composites, and polymers.

What cannot be measured?

A few examples of incompatible materials include wood, paper, concrete, and foam products. These materials lack sufficient permeability to high-frequency sound waves to allow ultrasonic measurement.

Brand in this category on Amazon

Sponsored