Feature

●NOTE: We also sell same bags with no studs if you like
●Quick release straps, Adjustable center Yoke, Universal fitting
●4 Tie down ribbons secure fit, Size 14 x 5.25 x 11"
●100% Waterproof, Will not blister in rain, Does not crack like leather
●UV Protected, Will not trun white/fade in real heat, Rain and Dust Flaps, Adjustable Center Yoke


Description

Saddlebags feature a quick-release easy-on / easy-off system that allows you to remove the bags and take them with you by zipping them off. Features heavy-duty zippers, quick-release strap buckles and locks to keep the bags secure.

Made from leather-like PV material which is extremely durable and holds up to the most extreme weather. Premium grade material feels, smells and looks the same as top quality cowhide leather but lasts much longer.

UV protected and waterproof bags wont crack, sag or fade/rot due to rain or sun exposure and wont turn white in extreme heat.

Slanted throwover motorcycle saddlebags with studs and conchos

220x-4008220x-4008

SD4008pv-2-A+220xSD4008pv-2-A+220x

SD4008-PV_3-A+-220X.jpgSD4008-PV_3-A+-220X.jpg

SD4008-PV-CLIP-A+220X.jpgSD4008-PV-CLIP-A+220X.jpg

Waterproof Saddlebags

  • Dimensions: 14" x 5.25" x 11"
  • Does not Crack like leather
  • UV Protected Will not turn white/fade in real heat
  • Will not blister in rain

Adjustable Yoke

  • Rear pouch pocket 8 x 3" with Velcro flap closure
  • Locks help prevent the bags from being removed.
  • Tie Strings to Frame

Center Yoke with Locks

  • Center yoke goes under the passenger seat and the bags are tied down to the frame.
  • Heat shield helps protect bags.
  • Must leave at least 1" of clearance from pipes.

Locking Buckles

  • State of the Art look & feel like leather.
  • Quick release clips for easy access may also be locked.
  • Chrome stud rivets
  • Bags may be drilled and mounted if desired.

Motorcycle Saddlebags Measuring Guide

Saddlebags-diagramSaddlebags-diagram

Will these bags fit my motorcycle?

Below is a guideline for determining which set of saddlebags will fit on your bike. It works in most cases, but not all.

  1. You will need a ruler or measuring tape. Please go to your bike and take the following measurements
  2. Take a side to side measurement: Measure side to side, from the back of the saddle seat, (riders position) to the arm of the directional signal, youll need to compare this measurement with our length measurements of the desired saddlebag. This measurement should be greater than the bags length. (See images above for reference)
  3. Take a top to bottom measurement: Measure from the bottom of the seat pad to the top of the exhaust pipe as a reference. This measurement must be at least 1" inch greater than the height of the desired saddlebags. (See image above for reference)

Use the measurements taken to provide a guideline in determining which saddlebags will fit your motorcycle.

Product information