Feature

●[HIGH QUALITY]----The shell is made of ground 4S material, durable and not easy to damage.
●Material of the Contact Area: Hard-bonding,Housing Material: Ground 4S,Protection Tube: 1 meters minimum bending radius R25,Cable: 2 meters oil resistant 4-core.
●[ACCURATELY]----The sharpness corner of the tool directly contacts the tip of the tool related to the machining size, and its position, size, and output are measured, with high accuracy.
●The sharpness corner of the tool directly contacts the tip of the tool related to the machining size, and its position, size, and output are measured, with high accuracy.
●No built-in amplifier required, no deviation due to temperature and power supply voltage fluctuations of the part where the tool is located, can be directly input to the NC and program (PLC)


Description

11
22

Specification:

Item Type: Automatic Tool Setting Gauge

Output Mode: B: NC (normally closed)

Stroke: 5mm

Repeatability: 0.001mm

Electric Shock Life: 3 million times

Protection Structure: IP67

Contact Force: 1.5N

Material of the Contact Area: Hard-bonding

Housing Material: Ground 4S

33

44

55

Protection Tube: 1 meters minimum bending radius R25

Cable: 2 meters oil resistant 4-core

Package List:


1 x Automatic Tool Setting Gauge

Electrical Aspects:

1. Contact rating DC24V ± 10% 20mA (maximal)

2. When the body of the machine is grounded, use the tool setter to install it on the side of the ground wire.

3. For the tool setting instrument with LED, pay attention to the connection (+) (-) when connecting. Recommended value is 10mA, resistance load.


4. For the output structure when the interface unit is attached, please read the user manual

Note:

1. Please control the tool setting speed at 50 ~ 200mm / min


2. Operating ambient temperature range: 0 ~ 80 3. Please control the voltage at DC24V and the current below 20mA

66

77

88