Feature
●【Applicability】B10-AL 496 fuel tank filter is suitable for common fuels, such as diesel, fuel oil, and so on. Fuel tank filter assembly with protective sheet and raw material belt prevents the cartridge from being damaged due to pressure.
●【Excellent Performance】The fuel filter is made of advanced filtration media, which can effectively filter carbon, sand and metal debris in the oil, keep the filter in the car clean and reduce the damage caused to other fuel delivery parts. The fuel filter element is 30 micron, providing high flow rates and superior filtration efficiency.
●【Replace Number】Fuel tank filter assembly with thread tape replace B10-AL 496. Fuel tank filter with 1" NPT pipe fittings inlet and outlet marked at the top of the cap.
●【Specifications】The fuel filter assembly has a maximum flow rate of 25 gpm, with an operating pressure of up to 150 psi and a gravity flow rate of approximately 5 gpm.The Hyaline Bowl makes it easy to monitor fuel flow. The bottom is equipped with a drain valve to drain water out.
●【Quality Service】Package includes:B10-AL 496 fuel tank filter assembly * 1, PTFE thread tape * 1. If you have any questions, welcome to contact us anytime, we will reply you within 24 hours.
Description
B10-AL 496 Fuel Tank Filter Assembly
Fuel filter element keep a clean 496 filter in your vehicle can reduce damage done to your engine and other fuel delivery components. 30 microns, provide high flow rates and superior filtration efficiency, protect fuels from particles
496 fuel tank filter assembly fits common fuels such as unleaded gas, diesel, fuel oil and so on. With 1" NPT pipe fittings inlet and outlet marked at the top of the cap.
Feature:
- Fuel filter element: 30 microns with protective sheet
- Height: 9.5”
- Inlet/Outlet size: 1” NPT
- Hyaline bowl with drain valve
- Flow rate: Max 25 gpm
- Working pressure: Up to 150 psi
- Gravity flow rate: Approximately 5 gpm
Installation:
- Attach filter top cap to storage tank valve on opening marked “IN”.
- Attach hose and nozzle to filter opening marked “OUT”.
- When installing the element and bowl, apply a coating of oil to each side of gasket.
- These components should be hand tightened only. Over tightening of the filter bowl will result in difficulty in removal at a later date.
- When assembly is complete, check for leaks.
