Feature
●?AC HEATER BLOWER MOTOR - The Blower Motor is responsible for producing air that goes through the vents of your vehicles AC and heating system. If this part is damaged,the AC system will not be able to circulate heated or cooled air. At this time, you need to replace the blower motor【NOTE:】Please use the year/make/model drop down bar to confirm the compatibility.
●?COMPATIBLE VEHICLES - The Heater Blower Motor Replacement for 2004-2010 Infiniti QX56, 2005-2015 Nissan Armada, 2004 Nissan Pathfinder, 2004-2008 Nissan Titan. REPLACES PART NUMBERS: 700174, 27226ZH00A【NOTE】Please use the year/make/model drop down bar to confirm the compatibility.
●?EASY INSTALL -The blower motor is located under the passenger side dash of your vehicle,Just remove a few screws under the passenger side dash,Remove the old blower motor and put the new one in.
●?BENEFIT OF THE BLOWER MOTER - provides a comfortable ride environment for the occupants, reduces the fatigue of the driver.
●?1YEAR WARRANTY - Every product must take inspected and tested multiple times before the shipment, Please rest assured to buy. If you have any questions about the product, Please feel free to contact us.If the blower motor fails, is damaged, We will provide free replacement or refund.
Description
FITMENT OF THE HEATER BLOWER MOTOR:
2004-2010 Infiniti QX56
2005-2015 Nissan Armada
2004 Nissan Pathfinder
2004-2008 Nissan Titan
Replaces Part Numbers: 27226ZH00A,700174
BENEFIT OF THE BLOWER MOTER：
1.Provides a comfortable ride for passengers.
2.Reduces the fatigue of the driver.
3.Improves the safety of driving, air purification.
【NOTICE】:
1.When you replace the blower motor, it is recommended to replace the new blower motor resistor.
2.Please use the year/make/model drop down bar confirm the compatibility before purchasing.
HOW TO INSTALL A NEW BLOWER MOTOR:
1.Remove the screws under the passenger side dashboard of the vehicle.
2.Find the HVAC blower motor.
3.Disconnect the blower motor electrical connector.
4.Remove the old blower motor.
5.Compare the new blower motor to the old one to verify that you have the correct part.
5.Install the new blower motor into the box and tighten the screws.
6.Connect the blower motor electrical connector.
7.After the installation is complete, turn on the air conditioner and check if it is running normally.
