Feature(may vary by option.)

●【Package Contains】100 pack 1 inch cable tie mounts and 100pcs 6 inch nylon zip ties.
●【Quality Material】Made from 100% industrial strength 6/6 nylon, with effective flame retardant and good insulation.
●【Strong Stickiness】There is strong glue on the back of mount, could support 30LB of pulling force.
●【No Residue】Great manufacturing process, there will be no residue left on the surface if you want to remove the mount.
●【Pre-punched Design】Theres built-in screw holes for rough surfaces use or adding strength (screws not included).

[White]




[Black]





Description

cable tie mountcable tie mount

Features:

cable tie mountcable tie mount

cable tie mountcable tie mount

cable tie mountcable tie mount

Quality Material

100% industrial strength 6/6 nylon, with effective flame retardant and good insulation.

Strong Stickiness

There is strong glue on the back of mount, could support 30LB of pulling force.

Self Locking zip Tie

The zip ties could lock items in place securely, and the locking teeth stop the cable tie at the desired length which will be getting tighter each time you pull.

Easy to Install:

cable tie mountcable tie mount

cable tie mountcable tie mount

cable tie mountcable tie mount

cable tie mountcable tie mount

1. Just peel off the backing paper and place firmly on a clean and smooth surface.

2. Then get the zip tie through the hole.

3. Place the cable on the mount.

4. Tighten the tie and cut off the excess.

Using screws could add strength.

(screws not included)

Notice:

  • Please fix the mount on a clean and smooth surface.

  • After applying self-adhesive glue, press it for 30 seconds and wait 24 hours before use.

  • The glue is best to be glued once and should not be disassembled repeatedly.

  • If you want to remove the mounts, you can use a hair dryer to heat for about one minute, then they will fall off easily while dont damage the surface!

Looking for specific info?