Feature

●1. Lift range : Minimum height: about 90MM / Maximum height: approximately 360MM
●2. High Quality: The use of high-quality steel, strong bearing gravity, resistance to pressure.
●3. Solid steel shaft, thick plate material of the shaft, easy to rotate, effortless operation.
●4. Groove design, the base and the top with nails reinforcement, the use of more secure and more solid.
●5. Scope: Suitable for small and medium sized vehicles. Such as: cars, Buick, Santana, Vietnam and other vehicles;


Description

The scissor jack, with tooth gears, can extend from 90mm(close position) to 360mm, more than enough to lift most vehicles.

Condition: Brand new
Color: Black
Minimum height: about 90MM
Maximum height: approximately 360MM
Lifting: 2.0T
Color: Black
Material: Steel
Net weight: 2.1KG
Item Size: 35*8.5*8.5 (L×W×T)

Scope: Suitable for small and medium sized vehicles. Such as: cars, Buick, Santana, Vietnam and other vehicles.

Packing include:
Scissor jack * 1
Handle * 1

Before Use
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.

OPERATING INSTRUCTIONS
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

CARE AND MAINTENANCE
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.