Feature(may vary by option.)
●［Application Scenes］-Read/Clear DTC trouble codes, read Control Modules, Code Modules, Adaptions, compatible for Volkswagen Audi Skoda an seats, compatible with most of cars made after 1994. Please refer to Product Description below for supported car list in detail.
●［Converter Cable］- Made by Washinglee. Built in FTDI chip, USB A 2.0 to OBDII 16-pin male. No CD inside the package, Driver/APP will be sent to buyers by Email.
●［Protocols Supported］- Support terminal K bus communication, Terminal (L) ignition device for waking up ECU. Compatible for 3 different protocols with same OBD2 connector including ISO (ISO9141) ISO/KWP, VPW and PMW. The K Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996. Not support CAN -BUS.
●［APP and OS Supported］- Compatible for KKL409. Support 32 bit XP and 32 bit Win7. Not support directly 64 bit Win10 (VMware is required). If your computer is running on 64 bit Win10, you can use VMware on 64 bit Win10 to simulate 32 bit XP/Win7 environment.
●［Important Note］-Without CD inside the package, the driver and User Manual will be sent to buyers by Email. We can provide technical support (including remote installation if necessary) and 1 year warranty. Please refer to product description for more helpful information.
[V141 Cable for VW & Audi]
[Blue Cable KKL409]
[Dongle Cable]
[1260 for Diesel & Petrol Cars]
[Red Cable KKL409]
Description
Important Note: There is no CD inside the package, the driver and User Manual will be sent to buyers by Email. If the cable seems not working, please update the driver, or contact us for technical support.
Support vehicles
1.for VW:
1)Compatible for Beetle/Bora/Caddy/Corrado/Golf MK2/G-olf MK3/Golf MK4/Jetta MK3/Jetta MK4/Lupo/Passat MK3/Passat MK4/Polo MK3/Polo MK4/Touran/Touareg/Transporter T3/Transporter T4/Transporter T5.
2)Not Compatible for Caddy (2K)/Golf MK5(1K)/Golf Plus/Jetta MK5 (1K)/Passat MK5(B6)/Passat MK6 (B6)/Phaeton/
2. For Audi Models:
1) Compatible for A2/A3/A4 Cabriolet/A6/A8/S2/S3/TT
2) Not Compatible for 80/100/200/A3(8P)/A4(B7)/A6(C6/4F)/A8/A8L(D3/4E)/Q7
3.for Skoda:
1)Compatible for Fabia/Felicia/Octavia MK 1/Octavia MK 2/Superb
2)Not Compatible for Octavia (1Z)
4.for SEAT Models:
1)Compatible for Alhambra/Altea/Arosa/Cordoba/Ibiza/Inca/Leon MK 1/Leon M-K 2/Toledo
2)Not Compatible for Altea (5P)/Leon(1P)/Toledo (5P)
How to use:
Step 1: Plug in cable to computer / laptop
Step 2: Install cable drivers (downloaded from the indicated Website)
Step 3: Make any additional settings which your diagnostic software suggests
Step 4: Set the switch on the VAG-COM to diagnose the desired ECU
Step 5: Plug cable into cars OBD connector
Step 6: Connect using the diagnostic software product
Step 7: Fit for only.