Feature(may vary by option.)

●?TRIRON N series mppt controller, an update series of Tracer A/AN Series controller, can be integrated with different display and interface modules to meet a variety of functional requirements. Can automatically identify and load the drivers of various modules.Modular design for easy combination and replacement;Advanced MPPT control algorithm to minimize the MPP loss rate and loss time;Advanced MPPT technology, with efficiency no less than 99.5%.
●?Negative groud designed of this modual mppt controller can be widely used for different applications, e.g., communication base stations, household systems, street lighting systems and field monitoring, RV solar system etc.
●?7 battery type selection Sealed(AGM), Gel, Flooded, Lead-acid User, LiFePO4 Lithium, Li(NiCoMn)O2 Lithium, Lithium User(9~34V). Dual 5V DC USB output interface of this mppt controller can charge your electronic devices directly.
●?Master and slave RS485 communication modules design, reading the load or inverter operating data;Control the inverter switch through the relay interface;Provide 5VDC power through the dual USB output interface to charge electronic devices.
●?Three Indicator with different color show your PV/Battery/Load working Status more Intuitive; FIve Button to adjust and browsing systems parameters in more simpler way.

[TRIRON2210N+MT50+RTS+RS485]





Description

The TRIRON N series controllers are modular-designed MPPT solar controller.

With the advanced MPPT control algorithm, TRIRON N series controllers can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any conditions.

With the adaptive three-stage charging mode based on a digital control circuit, TRIRON N series controllers can effectively prolong the life cycle of batteries, significantly improve the system performance and support all-around electronic protection functions, minimize damages to components of the system caused by incorrect installation or system failure at the utmost, and effectively ensure safer and more reliable operation of the solar power supply system for a longer service time.

Triron3210N-T-1Triron3210N-T-1
Triron1206N-T-2Triron1206N-T-2

  • Advanced MPPT control algorithm to minimize the MPP loss rate and loss time
  • Advanced MPPT technology, with efficiency no less than 99.5%
  • Maximum DC/DC conversion efficiency of 98%
  • Ultra-fast tracking speed and tracking efficiency
  • Automatic limitation of the charging power and current
  • Wide MPP operating voltage range
  • Multiple load work modes
  • Supports multiple types of lead-acid and lithium batteries
  • Real-time energy statistics function
  • Overheating power reduction function

Triron1206-2Triron1206-2

MT50MT50

RTSRTS

RS485RS485

System voltage:12/24V DC

Rated charge current: 30A

Max Input Power: 390W(12V System) | 780W(24V System)

Max.PV open circuit voltage: 100V | 92V (at 25℃)

Battery type: Sealed, Gel, Flooded and User

Grounding: Common negative

Automatic identify and display the type, model and relevant parameter data of controllers.

Direct, convenient and rapid operation of six navigation function keys, Real-time display of failure information of the connection devices.

Real-time display the operational data and working status of the connection devices in digital, graphic and textual forms by a large-screen multifunction LCD.

The standard length of the cable is 3m.

Acquisition of battery temperature for undertaking temperature compensation of control parameters,

NOTE: The temperature sensor short-circuited or damaged, the controller will be charging or discharging at the default temperature 25℃.

The standard length of the cable is 1.5M.

USB to RS-485 converter is used to monitor each controller on the network using Solar Station PC software.

Triron1206N-T-4Triron1206N-T-4

  • NOTE: While wiring the controller do not close the circuit breaker or fuse and make sure that the leads of "+" and "-" poles are connected correctly.
  • NOTE: A fuse which current is 1.25 to 2 times the rated current of the controller must be installed on the battery side with a distance from the battery not greater than 150 mm.
  • NOTE: If an inverter is to be connected to the system, connect the inverter directly to the battery, not to the load side of the controller.

  • Package list:
  • 1 x Solar Charge Controller
  • 1 x User Manual
  • 1 x MT50
  • 1 x RTS
  • 1 x RS485

Triron1206-5 Triron2210-5 Triron3210-5 Triron4210-5 MT50 RTS+RS485
TRIRON1206N+MT50+RTS+RS485 TRIRON2210N+MT50+RTS+RS485 TRIRON3210N+MT50+RTS+RS485 TRIRON4210N+MT50+RTS+RS485 MT50 RTS+RS485
Rated charge current 10A 20A 30A 40A ompatible for TRIRON N / Tracer AN / Tracer-BN series USB to RS485 adapter --Line length: 1.5m
Max. PV open circuit voltage 60V/46V(at 25℃) 100V/92V (at 25℃) 100V/92V (at 25℃) 100V/92V (at 25℃) -- Remote Temperature Sensor -- Length: 3M
Max. PV input power 130W/12V 260W/24V 260W/12V 520W/24V 390W/12V 780W/24V 520W/12V 1040W/24V -- --
Battery Type Sealed / Gel (AGM) / Flooded / LiFePO4 / Li-NiCoMn / User Sealed / Gel (AGM) / Flooded / LiFePO4 / Li-NiCoMn / User Sealed / Gel (AGM) / Flooded / LiFePO4 / Li-NiCoMn / User Sealed / Gel (AGM) / Flooded / LiFePO4 / Li-NiCoMn / User -- --
RS485 interface 5VDC/100mA 5VDC/100mA 5VDC/100mA 5VDC/100mA -- --
USB interface 5VDC/2.2A(Total) 5VDC/2.2A(Total) 5VDC/2.2A(Total) 5VDC/2.2A(Total) -- --
Backlight time Default:60S,Range:0~999S(0S:the backlight is ON all the time) Default:60S,Range:0~999S(0S:the backlight is ON all the time) Default:60S,Range:0~999S(0S:the backlight is ON all the time) Default:60S,Range:0~999S(0S:the backlight is ON all the time) -- --
Recommended cable 12AWG(4mm²) 10AWG(6mm²) 8AWG(10mm²) 6AWG(16mm²) -- --
Grounding Common negative Common negative Common negative Common negative -- --