Feature

●★FEATURE:The single driver design is composed of high?quality chips and electronic components, which can provide excellent and stable performance.
●★MORE STABLE:The sinusoid solution makes it more stable than ESC and not easy to burn out.
●★EASY TO USE: It is equipped with a bluetooth mobile phone APP port, which can set various parameters of the control panel, and the remote control has two-way communication.
●★FINE WORKMANSHIP:Professional manufacturing, stable performance and high reliability.
●★SUIT FOR:Suitable for most of electric four-wheel skateboard.


Description

Specification:

Item type: Single Drive Drive Set

Material: plastic

Color: As picture shown

Weight: Approx. 172g

Rated voltage: 24V

Product Category: Pedal Scooter
Remote control battery: built-in lithium battery
Capacity: 400mAh
Applicable people: universal
Current: 8A-12A
Speed: 3000rpm
Induction mode: for Hall
Maximum load capacity: 120kg

Large size of motherboard: Approx. 78x58mm/3.1x2.3in

Small size of motherboard: Approx. 35x20mm/1.4x0.8in

How to connect the remote control and the controller board:

1. Connect the control board to the power supply.
2. Turn on the power of the control board and wait for 2 seconds. Then press and hold the switch for about 6 seconds until the power indicator flashes.
3. Turn on the remote control, and then use a small screwdriver to press the code synchronization switch on the lower left corner of the remote control.
4. Turn off the remote control for two seconds, and then turn it on again. Wait for the remote control signal light and the switch signal light to flash simultaneously, indicating that the matching is complet

Package List:

2 x Motherboard
1 x Motor wire
1 x Power supply cable
1 x Remote control
1 x USB cable

Note:

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.