Seachem Safe Water Conditioner Safe is the complete and concentrated dry conditioner for both fresh and salt water. Safe removes chlorine, chloramine and ammonia. Safe converts ammonia into a safe, non-toxic form that is readily removed by the tanks biofilter. Safe may be used during tank cycling to alleviate ammonia/nitrite toxicity. Safe detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. Safe is non-acidic and will not impact pH. Safe will not overactivate skimmers. Use at start-up and whenever adding or replacing water. Safe is the dry version of Prime(R) and shares all of its advantages; however, Safe is even more concentrated than Prime(R) . Product Features: Works great with freshwater and saltwater aquariums Non-acidic and wont impact pH Will not overactivate skimmers Item Specifications: Sizes: 8oz 2.2lb 8.8lb Directions: To remove-(Directions for 8.8oz or higher) Chlorine: use 5 g (1 tsp.*) to each 1625 L (450 gallons*) of tap water (removes 4 ppm). Chloramine: use 5 g (1 tsp.*) to each 1250 L (300 gallons*) of tap water (removes 4 ppm). Ammonia: use 5 g (1 tsp.*) to each 400 L (100 gallons*) of tap water (removes 4 ppm). Do not overdose! To detoxify nitrite/nitrate in an emergency situation use up to 5 g (1 tsp.*) to each 400 L (100 gallons*). Use fish to gauge toxicity reduction as test kits will still show presence of nitrite/nitrate even when detoxified. May be added to aquarium directly, but is better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. If temperature is > 30 C (86 F) cut dosing in half.