MELDIKISO Inkjet Plate Making Film Waterproof Inkjet Milky Transparency Film for Silk Screen Printing (13"/17"/24"/36"/44" Roll)
Roll Sizes:
13" x 100FT
17" x 100FT
24" x 100FT
36" x 100FT
44" x 100FT
Specs:
Caliper/ thickness: 5 mil
Ink Support: dye/pigment (water based), works with Epson, Cannon, HP and many other printers
UV DMIN <1.0
UV DMAX >4.0
Printing side is the non-smooth side, wet finger will stick to the coated side.
Film inkjet film allows screen printers to output films faster, use less ink, achieve ultimate black density and reuse the film positive time and time again.
Features and Benefits:
super high resolution and definition
water resistant and instant dry and anti-sticking
ink dries on the nano particles of the coating
Dimensionally stable film means great registration and no curling
Quick dry time equals faster production times and less ink usage
Accurate dot placement results in excellent line definition and acuity
High ink load capacity
Great film opacity
Minimal "yellowing" allows the film to retain the image over time and be used repeatedly
Storage Instructions:
Temp 59 - 86° degrees F (15 - 30° C)
Repack opened rolls or boxes when not in use
Allow material to stabilize to room conditions for 24 hours before use
Product Support Information:
Side of the film to print on: waterproof film has two sides, the carrier sheet side and the inkjet receptive side. To determine which side is the inkjet receptive side, dampen your finger and touch a corner of the film, the side that is sticky is the side that will take ink.