Feature(may vary by option.)
●【High quality heavy duty double sided tape】- Proven Reliability from VHB Mounting Tapes. Very high bonding tape works extremely well on smooth surfaces and widely used for LED strip lights, trims, car registration plates, name plates, address plaques, signs, emblem, car holders, mosquito/bug screen, metal mailbox, mirrors, hangers, tooth brush holder, photo frames, power strip and other automotive home office decorations.
●【WEATHERPROOF FOAM TAPE】- with strong resistance to moisture, humidity, and other extreme temperatures, makes it suitable for both indoor and outdoor use. It uses sealed foam to isolate water vapor, good for kitchen and bathroom.
●【Flexible And Extensibility】 Simple peel, No gluing, No heating, No screwing, and No wall damage. foam tape can be extended to suit your needs.
●【Easy to Use】This foam tape is easy to install, just peel off the tape and stick it to the surface of the object. And it is easy to reposition when it’s not fully compressed and repositioning will not influence adhesion durability, it bonds quickly and securely when it’s fully compressed. No drilling, no screwing, no heating.
●【3M 5952】- Proven Reliability from VHB Mounting Tapes. Total 15.4 Ft/4.7M, 1/2 Inch/12.7mm Width,Thickness:0.04Inch/1.1mm. High strength and durability. The stickiness will gradually increase over time and display perfectly after 24 hours. .
[1 u201D x 15.4 FT]
[1 & 4in*15.4ft]
[1 & 2in*15.4ft]
Description
3M VHB Heavy duty double sided tape
This heavy-duty two-sided tape can be used for a wide array of projects. Mount bathroom fixtures in your home, add signage to the exterior of a commercial building or deck-out your car with the
flashiest LED lights. It adheres firmly in minutes and becomes 100% bonded within 72 hours. Because it is particularly capable of providing a smooth, quiet and durable ride on the open road, it is the preferred 3M automotive double sided tape for specialty vehicles.
Easy Installation:
? 25% strength of bond in 30 minutes
?50% strength of bond in 60 minutes
?75% strength of bond in 24 hours
? 100% strength of bond after 72 hours.
Application Guide:
1.Surface Cleaning: Quick pre-clean of tough spots if necessary. Wet cloth to remove most contaminants. Final wipe with dry cloth.
2. Use scissors to cut the length you need (if it is used for larger and heavier items, such as photo frames, industrial crops, etc., use more according to the actual situation)
3. The temperature in winter is low, if it feels not very sticky, it is recommended to use a hair dryer to heat it up.
4.Tape Application by Hand: Start the tape at the edge of the surface and lay it down, applying constant pressure as you go. Apply a roll down force of at least 15 lbs with a dense J-roller over the entire area to ensure good contact between the tape and the first substrate surface. Remove the protective liner to apply the other substrate.
5.After sticking the tape, let it stand for 24 hours before sticking the adhesive (if it is a heavy object, please keep standing for 72 hours, do not tear off the release paper to avoid dust and impurities)
6.Can not be used on litchi pattern surface, peeling, rough surface, or silicone material
|
|
|
|
|---|---|---|
|
|
|
|
