Feature

●Compatible with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10 green strips: each strip contains 10 pieces powder loads.
●Help to provide the power to penetrate heavy duty, hollow block and concrete
●Color: Red strips loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
●High quality powder loads, Includes 100 power loads per box
●Compatible with most other PAT brands; Complete burn keeps the tool clean


Description

This listing features 1 box pack of 100 green strip shot loads, it will be a great helpful tool Compatible with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10 Power load of 100 Count. These loads provides enough power to penetrate concrete and hallow block.

Compatible with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10

Help to provide the power to penetrate hollow block and concrete

Color: Green loads

Includes 100 loads per order

Compatible with Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10

Dimension: 6.8 * 11 mm

Caution: Please test-fasten with the lowest power level for your tool. If more power is required, try the next higher power level until proper level and fastening is achieved. Please check the operators manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in some serious hurt.so please be more careful for it.

Advantages Powder Guide:Power level is designated by the load level number marked on each box; also by the color of the box and each powder load. As the number increases, the power level goes up too.