Feature(may vary by option.)

●5PCS UP & DOWN cut spiral router bit with 4mm (5/32" )shank and 4mm (5/32" ) cutting diameter, 22mm (7/8") cutting length, 45mm (1-3/4") for total length
●SOLID CARBIDE AND DLC Coating: The up and down cut spiral router bit is made of solid carbide. And DLC Coating with high hardness and heat resistance enables the tools cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
●Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.
●The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
●HIGH PROCESSING EFFICIENCY: The edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32° with high speed, reduce changing times and improve the production efficiency.

[10 3.175mm Shank-3.175mm Cutting Dia-17mm CEL]




[2 6mm Shank-6mm Cutting Dia-25mm CEL]




[5 6mm Shank-6mm Cutting Dia-22mm CEL]




[1 1  & 4   Shank-1  & 4   Cutting Dia-1  CEL]




[2 6mm Shank-6mm Cutting Dia-22mm CEL]




[2 6mm Shank-6mm Cutting Dia-32mm CEL]




[5 6mm Shank-6mm Cutting Dia-25mm CEL]




[2 1  & 4   Shank-1  & 4   Cutting Dia-1  CEL]




[10 3.175mm Shank-3.175mm Cutting Dia-22mm CEL]




[5 6mm Shank-6mm Dia-32mm CEL]




[5 1  & 4   Shank-1  & 4   Cutting Dia-1  CEL]




[5 4mm Shank-4mm Cutting Dia-22mm CEL]





Description

七彩?刃?合刀海?七彩?刃?合刀海?

The Compression Router Bit

The compression cutters are designed with both up and down-cut flutes. The top portion of the length of cut, closest to the shank, has a left hand spiral, forcing chips down.

when using the compression bit, you must ensure the first pass is below the upcut portion of the bit, or you will get results similar to just cutting with an upcut bit; Using a ramp in, plunging into the material over a distance instead of all at once, and a lead in, starting outside the design to get to the pass depth, it will ensure that the entire piece is perfectly clean on the top and bottom. Compression bits are designed to cut in a single pass, however, if your machine cannot handle that depth of cut you can cut in multiple passes, as long as that first pass is below the upcut portion of the bit.

七彩?刃?合刀七彩?刃?合刀

七彩?刃?合刀七彩?刃?合刀

七彩?刃?合刀七彩?刃?合刀

qq

DLC COATING

  • DLC coating increases life by 5 times
  • DLC micro-nano composite coating
  • High Hardness
  • High Wear Resistance
  • Stable Performance
  • High Temperature Resistance
  • Smooth Chip Removal

Up & Down Cut Milling Cutter

Compression bit is the combination of both upcut and downcut spirals. The bottom of the material will be pulled upwards while the top of the material is pushed downwards thus eliminating the risk of damaging the laminated surfaces, leaving a sharp, clean edge on both sides of your workpiece. Non-stick crumbs, smokeless, and silent during processing, smooth cutting, and fast chip removal.

Suitable Material

For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, PCB, SMT, CNC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing etc.

Universal Chamfered Round Handle

  • Good compatibility, easy to use, tightly clamped without slipping
  • Increase the vibration resistance and milling speed of the milling cutter
B07YC8XHCL ??玉米0.5 七彩?? 七彩?? B0B378NMZ7 B0CS5ZY1GS
Straight Router Bits Set Titanium Coat Carbide End Mill Compression Bit Carbide Square End Mill for Aluminum Compression Bit Straight Router Bit
Shank Dia 1/8" 1/8" 1/8" 1/8" 1/4" 1/8"
Cutting Dia 1/8" 1/8" 1/8" 1/8" 1/8" 1/16"
Cutting Length 1.0mm-3.0mm 0.5mm 7/8" 1/2" 1" 1/2"
Total Length 1-1/2" 1-1/2" 1-3/4" 1-1/2" 2-1/2" 2"
B07F35YHKV ??6x25 B0CRTR6JWL B0B38B1PMW B09ZTXD8R6 修?刀套?
Two Flute Spiral Upcut Milling Cutter Tool Set Compression Wood End Mill Bits Ball Nose End Mill Single Flute (O Flute) Spiral End Mill CNC Single Flute Router Bits Spiral Flush Trim Router Bit Set
Item Name Flat Nose Carbide Endmill Two Flutes Spiral Carbide Tool Cutters Ball Nose End Mill Single Flute (O Flute) Spiral End Mill Milling Cutter for Aluminium Spiral Flush Trim Router Bit Set
iso30 ISO30 ER32 45L延?杆 5pcs ISO20 ER20 MT2 ER32 B0CPLGYLQK B0CCNWZXJ4
ISO30 Tool Holder Clamp ISO30 ER32-45L Balance Collet Chuck ISO20 ER20 35L Collet Chuck MT2 ER32UM M10 Morse Collet Chuck Setup Blocks Height Gauge Set BT30 ER32-45L Balance Collet Chuck
Item Name ISO30 Tool Holder Clamp ISO30 ER32-45L Balance Collet Chuck ISO20 ER20 35L Collet Chuck MT2 ER32UM M10 Morse Collet Chuck Setup Blocks Height Gauge Set BT30 ER32-45L Balance Collet Chuck

Whats in the box

  • Carbide