Our have own professional R&D design team dedicated to creating quality products, providing customers with affordable products and a good shopping experience. Automotive-leader Brands products are 100% brand new aftermarket products.The Automotive-leader brand has cooperated with many foreign factories and directly purchased the original chips. After the development and processing by domestic professional teams, accuracy meet the professional specification as OEM standard, making it easy to installation & direct plug-in replacement and use high temperature corrosion resistant materials can extend the life of the product.
Vehicle Compatible :
Tips
Please confirm the part number and your vehicle information (e.g Year, Make, Model) & Engine before placing an order.
Package Content : 2Pcs 27709-06a
Orifice Type: 6 Holes Disc Engine
O-Rings Included: Yes, preinstalled
Filter Design: Basket filter design at inlet
Injectors Design: Metal & composite plastic
Resists abrasion and corrosion
Maximizes performance
Meet the professional specification as OEM standard.
The fuel injection nozzle is a simple solenoid valve. When the solenoid coil is energized, suction is generated. The needle valve is sucked up and the injection hole is opened. The fuel is ejected at high speed through the annular gap between the needle and the injection hole on the needle valve head. Mist, good for full combustion.
Please Note !!!
Our fuel injectors are all unopened new products, but due to the long distance of transportation, the surface of the product may be a little bit scratched or scratched due to friction, please rest assured to buy!
(Mind carefully shot)
If an injector is faulty on a vehicle with high mileage chances are the remaining injectors are in a similar condition, or will be in the near future. Replacing your injectors as a set ensures each cylinder is receiving the same amount of fuel leading to better performance and improved fuel economy. Since the time required to replace a single injector is about the same as replacing all the injectors it is recommended to replace them as a set.
|
|
|
|
---|---|---|---|
Fuel Injection Hole Blockage
|
Poor Sealing of Needle Valve and Needle Valve Body, Resulting in Poor Atomization or Dripping of the Injector
|
Air in the Oil Circuit
Poor Oil Supply
|
Insufficient Spring Force of the Piston Spring or Spring Break
Piston Wear, Affecting Oil Supply
|
23209-62040 Fuel Injector | 12634126 Fuel Injector | 12613412 Fuel Injector | 12580681 Fuel Injector | 16450-RGL-A01 Fuel Injector | 16600-EN200 Fuel Injector | |
---|---|---|---|---|---|---|
OE Part Number | 23209-62040, M717, 4G1597, 1580561, FJ585 | FJ1157 | FJ10736, 28076139, 217-3412, FJ1089, 67696 | 217-1621 | 16450-RDA-A01, 16450-RCA-A01, FJ485, 4G1709 | 16600 EN200 |
Direct Fit Application | Toyota | Buick | Chevrolet | Acura/Honda | Acura/Honda | Nissan |
Pin Count | 2-pin | 2-pin | 2-pin | 2-pin | 2-pin | 2-pin |
Orifice Type | 2 Hole Disc | 6 Hole Disc | 4 Hole Disc | 8 Hole Disc | 18 Hole Disc | |
Pre-Installed O-rings | ? | ? | ? | ? | ? | ? |
Package Quantity | 6pcs | 6pcs | 8pcs | 8pcs | 6pcs | 4pcs |
Automotive-leader Brand mainly products have Oxygen Sensors, Check valve, Hand Fuel Primer Pump Line, Parking Sensor, Ignition Coils, Fuel injectors, Air Flow Meter, Mass Air Flow Sensor/MAF Sensor, Nitrogen oxide sensor/Nox Sensor, Parking Camera, Window Switch, Crankshaft Position Sensor, Knock Sensor, Throttle Position Sensor, Oil Pressure Sensor, Door Lock Latch Actuator Motor, etc.
Automotive-leader Brand of products is complete, you are welcome to consult at any time, we will give you a detailed reply within 24 hours of receiving the consultation information.