Feature

●??GEPRC Happy to announce a new member of our family “ TinyGO” Ready To Fly Kit which is suitable for any novice from scratch and Indoor flight. Through a great number of tests, Better technical indexes and Good performance were obtained. TinyGO 4K professional version can record 4K 60fps video.
●??GEPRC Happy to announce a new member of our family “ TinyGO” Ready To Fly Kit which is suitable for any novice from scratch and Indoor flight. Through a great number of tests, Better technical indexes and Good performance were obtained. TinyGO 4K professional version can record 4K 60fps video.
●??TinyGO using TAKER F411 8Bit 12A system, reliable and stable,No Propellers in view, Anti-jamming VTX, NO Jello flight Footage, stable flight picture. TinyGO can use its own charger to charge. The charger uses the Type-C interface. You can use the movable power bank to charge as well. Using conveniently and quickly.
●??TinyGO can be flight more than 6 minutes (Depending on flight habits). Its stable electronic equipment and extremely strong and tough frame material make the FPV very stable and durable for crash. There is an EVA protection foam around the frame, More elastic and hard to damaged and deformed.
●??TinyGO is carefully assembled and assembles by GEPRC team, with excellent performance. You can start a whole new journey and enter into FPV World, TinyGO will be the best choice for your first FPV Drone. When you have any questions, write to us, we will provide the best customer service.


Description

Specifications of TinyGo 4K

Camera: Loris 4K
Image sensor: 1/2.7″ CMOS sensor
Horizontal: 800TVL
TV system: NTSC/PAL changeable
Video Resolution: 1080P@60fps / 1080P@90fps / 2.7K/60FPS 4K/30FPS 4K/60FPS [REAL 3.5K/60FPS)
Power Input: DC 4.5-20V
FPV FOV: 165°
Recording FOV: 170°
Mini Illumination: 0.01lux
Lens: 1.8mm Lens
Working Current: 380mA@5V/160mA@12V (low consumption)
OSD Menu: Yes (Support Voltage Display)
Video Files: MOV
Audio: Support
Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
Video Output: CVBS

Configuration

Name: TinyGO
Brand: GEPRC
Frame: GEP-TG16
Motor to Motor: 79mm
FC: TAKER F411 8Bit 12A
MCU: STM32F411
IMU: 42688-P
Blackbox: 16Mb
OSD: BetaFlight OSD w/ AT7456E chip
ESC: 8Bit 12A
VTX: RAD Whoop 5.8G 25~400mw VTX
Camera: Caddx Loris 4K 60fps
Propeller: GEMFAN 1636*4 (4 pairs)
Motors: GR1102 10000Kv
Receiver: Integrated ELRS SPI receiver
TinyGO 4K Weight: 54.8 Grams

Remote Controller

TinyRadio ELRS 2.4G Remote Controller
Radio Frequency: 2.4GHz
Radio Frequency: 2.4GHz
Range: 1000+ meter
Channel: 8
Transmit Power:<500mW
Antenna interface : SMA
Low Voltage alarm: <6.6v
Batteries: 2 x 18650 Batteries (not included)

FPV Goggle

Resolution: 800*480px
Size of Screen: 4.3 inch
Whole Size: 155mmx144mmx113mm
In-built batteries: 3.7v/2000mAh
Working Hours: 2.5 Hours
Weight: 314.6 Grams

FPV Batteries

Batteries Capacity: 530mAh
Voltage: 4.35v 1S1P
Discharge rate: 90C
Size:（61mmx16.7mmx7mm）
Weight: 12.7 Grams
Interface: PH2.0

Charger

Input power:5v（USB & Type C）
Full charged Voltage:4.35v
Output current : 500mAh
Charging:It can charge 2 PCS 1s HV lipo 4.35v HP2.0/GNB27 plug batteries at the same time

Include

1x TinyGO TinyWhoop
1x TinyRadio GR8 Transmitter
1x GEPRC FPV RG1 Goggle
1x GEPRC 1S LiHV 4.35v Charger
4x GEPRC LiHV 4.35v 90C Battery
1x Battery strap
4x Gemfan 1636*4 Props(pairs)
1x GEPRC Fly bag
1x Screwdriver