Feature

●Wide Frequency Range Supported: 100KHz covering up to 6GHz, Frequency step/resolution: 1KHz, Stability: 0.5ppm
●Custom Made Aluminium Case: Fits the RF Explorer Signal Generator as well as additional accessories. This carrying case allows to to protect your RF Explorer device and keep all the parts and components organized
●Calibrated Amplitude Range: -40 to +10dBm. Uncalibrated extended Amplitude range: -60 to +18dBm
●Money Back Guarantee: Ensures this will quickly become your favorite no-risk purchase.
●Software Updates included - Firmware upgrades and free Sweep and Tracking SNA control Windows software. Free firmware upgrades and free Sweep and Tracking SNA control Windows software.


Description

The RF Explorer Signal Generator Combo is a powerful, wideband fully programmable RF signal generator with harmonic filtering, high-performance amplifiers for higher output power, fine amplitude adjustment and support for frequencies as low as 100KHz covering up to 6GHz with no gaps. Generates CW signal at any frequency in the range.

Tracking generator functionality working together with RF Explorer when connected to the same PC Sweep generator between any to frequencies in the range, with selectable step size and speed.

Features

?Wideband support, very stable CW signal output

?Fine amplitude adjustment 0.25dB

?High output power up to +18dBm

?Optional recalibration procedure available upon request

Specification

• Frequency range supported: 100KHz to 6000 MHz
• Calibrated Amplitude range: -40 to +10dBm
• Uncalibrated extended Amplitude range: -60 to +18dBm
• Amplitude step/resolution: 0.25dB over calibrated range
• Amplitude accuracy (typical): +/-2dB in most frequency and power ranges
• Frequency step/resolution: 1KHz
• Frequency stability: 0.5ppm
• Temperature compensated (0-45C)
• Backlight for great indoor visibility and high contrast LCD for outdoor visibility
• Standard SMA 50 ohms connector
• Spurs: Internal fractional PLL configuration in some cases create spurs typically -50dBc or less.
• Harmonics: typical values range about -40dBc for 2nd harmonic, -50dBc for third and higher harmonics.
• Switch measurement point speed <10ms
• CW signal generator at any frequency in the range
• Tracking generator functionality working together with RF Explorer Spectrum Analyzer when connected to the same PC
• Sweep generator between any to frequencies in the range, with selectable step size and speed