Feature

●Barometric pressure sensor: Warm tip: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The allowed measurement error is +/- 1-3 cm.
●SFP module: zero potentiometer: reverse protection diode, test equipment and equipment are not damaged in an emergency situation
●Bending test amplifier: bending sensor - output, direct output can be read and processed directly on the device.
●Voltage output: The analog signals it outputs directly can be read and processed directly on the next level equipment.
●Test sensor module: ? output, direct output can be read and processed directly on the device.


Description

Package includes:
1 x Meter Bending Detection Test Sensor Module


Features
- : 2% traffic light
- Material: Modified Phenolic Substrate Measuring Board.
- Fatigue life: > 10 million times strain gauge sensor
- Analog output voltage: 0-3 gauge kit.
- flux: ordinary solder rosin skeleton decoration
- Plate size: 32 x 17 mm gauge kit
- Note: Light shooting and different displays may cause the colour of the item in the picture to be a little different from the real thing. The allowed measurement error is +/- 1-3 cm.
- Size: Electronic kits 3 x 1.5 cm.
- Voltage: 5V test sensor
- Resistance: 350 ohm strain gauge amplifier
- other features: inverters
Colour: as shown strain gauge.
: More than 10 million times, longer than other similar products.
zero light dependent resistance potentiometer
reverse protection diode meter load cell

product information
Transducer the strain gauges connected to the object to be measured to measure the are bent together, so that the inside of the metal sheet as in the pressure sensor bend.strain The working principle of the resistance meter is based on the effect of produced when a conductor or semiconductor material that is mechanically deformed under the action of external forces, the resistance value of the corresponding changes. The sensor of many metals during mechanical bending resistance will change