Feature(may vary by option.)

●Compatible Models: Replacement for Saratoga Spas, Pleatco PSG27.5, PSG27.5-XP4, PSG27-5, FC-0194, SD-00016 filtration cartridges
●Keep the Water Clean: The pleated fabric filter maximizes contact between filter media, allowing for greater capacity and reduction. The durable & washable 28 sq ft fabric has tight porosity and a dense weave which sifts out unwanted hair, leaves, dust, sediment, sand, etc. with a high strength, high flow design.
●Fit and Dimensions: The cartridge is designed for systems that use a 4 3/4 inch (Outside diameter) x 11 3/8 inch (Length) spa or pool filter.
●Easy to Install & Maintain: Fits and performs just as well as the original equipment manufacturer product. It is recommended that you change your pool or spa filter when the pressure gauge on the filter tank reaches 8 psi above the pressure recorded when first installed.
●Quality Standards: Tier1 filters pass rigid design, manufacturing, and filament testing delivering a product that is built for performance and priced for value.

[1]




[2]




[4]





Description

From Tier1, Your Leading High Quality and Maximum Performance Brand

Tier1 products and filters are tested to meet rigid quality standards to ensure you are receiving the best possible Tier1 product. From design & manufacturing, all Tier1 filters are inspected, tested, and cut in half to provide with high quality and maximum performance for your water filtration needs. Tier1 replacement filters deliver value with the performance you expect. Our Pool and Spa filters will clean your water faster and more efficiently with less wear and tear on your pump. Dive in with Tier1, the waters great!

Tier1 Filter, Pool and Spa, Pleated Fabric, Handle Top, Threaded BottomTier1 Filter, Pool and Spa, Pleated Fabric, Handle Top, Threaded Bottom

Tier1 PAS-1488 Replacement Pool Filter Cartridge

Comparables

Tier1 PAS-1488 Replacement Pool and Spa Filter fits systems that use 4 3/4-inch diameter by 11 3/8-inch length filters. Tier1 Pool and Spa filters will protect your investment engineered to outperform the competition and exceed your expectations.

High Quality Filtration

Features high durability filter fabric that maintains strength even when loaded with sediment, a tighter porosity and denser weave to capture more contaminants in less time.

High Flow Rates

A high strength, high flow core designed to support the filter while providing efficient flow rates.

Features

  • Bottom Hole Size: 1-9/10 Inches
  • Top Hole Size: Handle
  • Media Weight: 3 oz.
  • Media Surface Area: 28 Sq. Ft.
  • Actual Size: 11 3/8 inches (length) x 4 3/4 inches (outside diameter)
  • Filter Media: Pleated Fabric
  • Filter Life: 3 Months

Features

pleated fabric, increased surface area, pool filter pleatspleated fabric, increased surface area, pool filter pleats

cleaning filter, pool filter, filling pool, garden hose poolcleaning filter, pool filter, filling pool, garden hose pool

Clean Pool, Pure Water, Refreshing, Great FiltrationClean Pool, Pure Water, Refreshing, Great Filtration

Pleated Filter Media

Pleated filters are more structurally stable than non pleated and also maximize the effectiveness of your filter by exposing contaminants to an increased surface area. With more high durability fabric to sift out unwanted particles you can rest easy knowing your water will be clear for the lifetime of the product.

Washable Pleats

Extend the life and increase efficiency of your filter by cleaning it with a gentle stream of water. When youre filling your pool, remove and rinse your filter at the same time! Do not use high pressure pressure hoses or abrasive brushes as this can damage the filter. Tier1 also offers a Pool Filter Wand Brush that attaches to the end of any standard garden hose.

Sand and Sediment Reduction

Keeps your pool clean and pump free from sand and sediment that would otherwise cause damage or equipment failure.

Easy Installation and Maintenance

  1. Replace your filter when the pressure gauge on your filter tank reaches 8 psi above the pressure recorded when first installed.
  2. Turn off the power to your pump and bleed the excess air pressure of the system using the air valve on the filter.
  3. Remove any band clamps and/or lids to your filter.
  4. Remove the cartridge from the filter canister and dislodge any loose debris
  5. Rinse the cartridge thoroughly with clean fresh water and return it to the filter tank. Secure the tank lid and any band clamps.