Is your Raspberry Pi running hard all day?
Are you overclocking your B+, 2 or 3 to get every last bit of performance out of it?
Just worried about the life of your tiny computer?
Pick up a set of these aluminum heatsinks today. They have a layer of adhesive thermalfor efficient thermal transfer,which paste on one side to stick to the main chips
They definitely work, bringing the average temperature down well into operating specs, even when you had your Pi overclocked and running hard on RetroPi emulation
Features:
Simple, Effective Heatsink.Easy insurance for your Pi
Add these heat sinks and dont worry about slowdowns due to heat
Nicely made and cheap insurance against your Raspberry Pi overheating
Compatible with:
Raspberry Pi 3, Raspberry Pi 2, Raspberry Pi 1 B+, Raspberry Pi 1 A+, Raspberry Pi 1 A, Raspberry Pi 1 B,3d Printer
Description:
-These heatsinks have a layer of 3M thermal adhesive that allow easy installation on your board
-The heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases
-Fit the Raspberry Pi CPU / SoC well,and reduce the risk of hardware failure due to overheating
-These pure aluminum heat sinks include self-adhesive 3M thermal adhesive for efficient thermal transfer and providing additional cooling to the IC. Moreover, it is easy to be removed without any damaging to the chips with a razor blade too
Installation Instructions:
-Make sure the chip modules are free from dirt and grease
-Peel the protective liner off on the base of the heatsink
-Apply the heatsinks to the corresponding chip modules and apply firm pressure
Package Include:
-2 pieces - 0.35inch x 0.35inch (8.9mm x 8.9mm) aluminum heat sinks
-1 pieces - 0.56inch x 0.56inch (14.2mm x 14.2mm) aluminum heat sink