Product parameters:
Tool handle diameter: 16mm(0.63in)
Fan page length: 100mm(3.92in)
Diameter after fan blade expansion: 244mm(9.6in)
Working principle:
The chip remover is mounted on the spindle tool handle, and the fan blade is driven by the mechanical spindle to generate strong airflow, which can clean the table surface efficiently. Compared with the traditional air gun cleaning method, the remover can reduce the fatigue of personnel, avoid the pollution of the working area, and improve the working efficiency.
Usage:
1. The scrap cleaner needs to be fixed on the spindle with the tool handle.
2. Program a suitable movement trajectory according to the processed product
3. Start the spindle at 500rpm, accelerate the fan blade to 4000-7000rpm after expansion, and blow the workpiece downward.
4. After cleaning, lift the spindle and put away the fan blade.
Notes:
1. The height reserved space shall not touch the products and fixtures on the workbench.
2. The recommended distance is 10-15cm
3. Do not open the door of machine tool during use.