Feature
●Tub Spout with Faucet Aerator: Built-in faucet aerator, provides wider, more forceful spray and saves water
●Reliable Ceramic Cartridge: The ceramic disc cartridge can survive more times open & close test, ensuring a longer service life
●Single Lever Tub Faucet: Single lever design for effortless water volume, cold and hot temperature control with soap on the hand
●Stainless Steel Tub Faucet：This bathroom faucet is made of stainless steel with brushed nickel finish, will resist corrosion and tarnishing through everyday use
●Bathtub Faucet with Pull Up Diverter: Pull up diverter on the top of the faucet, pull up or pull down the knob to open tub spout or handheld shower head as you like
Description
Tecmolog Stainless Steel Bathroom Faucet Wall Mounted Faucet
Bathtub faucet outlet
The bathtub faucet is made of stainless steel. When you pull the button down, water flows out of the bathtub faucet nozzle.
Handheld shower outlet
Pull the pull button upwards, and water will flow out of the handheld shower.
Faucet Details
|
|
|
|
|---|---|---|
Faucet AeratorBuilt-in faucet aerator, provides wider, more forceful spray and saves water. |
Faucet with DiverterThe faucet controls the flow of the faucet or shower by pulling the button up or down. |
Single Handle Bathtub FaucetThe temperature and flow of water can be controlled through a smooth handle. |
Product Description
|
|
|
|
|
|---|---|---|---|
MaterialStainless Steel Tub Faucet：This bathroom faucet is made of stainless steel with brushed nickel finish, will resist corrosion and tarnishing through everyday use. |
Installation Hole DistanceThe size of the water inlet is 3/4, and the installation hole distance can be adjusted to 5.9 inches (150mm). |
Outlet SizeThe outlet of the faucet is 1/2 male, which can be connected to standard 1/2" inch hose. |
AccessoriesPackage accessories are complete and easy to install. Accessories include: 1. faucet 2. stainless steel cap 3. stainless steel connector |
Installation steps
|
|
|
|
|
|---|---|---|---|
|
1. Make the teflon tape connect with connector. |
2. Install the connector. |
3. Measure whether the distance between holes is 150mm. |
4. Measure whether the two connectors are balanced. |
|
|
|
|
|
|---|---|---|---|
|
5. Install the bathtub tap adapter. |
6. Make the teflon tape connect with connector. |
7. Place the rubber into the inlet of the faucet. |
8. Install the faucet. |
|
|
|
|
|
|---|---|---|---|
|
9. Place the nut protective cover where the nut needs to be screwed in. |
10. Use a wrench to tighten the nut. |
11. Install the shower hose. |
12. Complete the installation of the faucet. |
