Specifications:
Product name: 4000W AC voltage regulator
Thyristor Model: BTA41600B
Size: Length 85 * Width 55 * Height 38mm, the knob hole 6mm.
Maximum power: 4000W (resistive load limit power), a long time should reduce power use.
Efficiency: more than 90%
Working voltage: AC 220V
Adjust the voltage: AC 10-220V
Note that the load must be connected to the regulator.
SCR is mainly used for resistive load (electric wire incandescent lamp, etc.), single-phase AC motor can also be the majority, but can not guarantee that other types of load please buyers to confirm. Fuse is not a panacea, there is reaction time, if the current is too large, in addition to burn out the fuse, the module may burn.
Note that the plastic cover on the connector as a result of the installation of the shell, can not fully open, screwdriver to twist point twist, the other to be careful when opened, forced to break off the lid is too large, express delivery may crush, for wearing parts, but Will not affect the use of the module, all the plastic lid related issues OUR is not responsible for Returns.
Internal Pictures:
Regulator size: 85mm long * 55mm wide * high 35mm
Note: there are many copies of our products on the market. Please recognize our shell with a layer of blue protective film, which can reduce the friction caused by transportation, and our switch with scale paper to welcome new and old buyers to buy.Buyer: please be careful when you tear the protective film outside, or you will tear it off with the switch.