Feature

●motor driver controller input voltage range is DC 9-36V, without heat sink rated current is 15A, with simple cooling rated current is 15A .
●Similar to L298 drive logic, three lines (PWM, IN1, IN2) to control speed, clockwise rotation, anticlockwise rotation and brake.
●Support full PWM, clockwise rotation or anticlockwise rotation can be control by key directly , PWM effective range is 0.1% ~ 100.0%.
●The motor speed controller can provide 5V power supply for the microcontroller or other controllers, with 5V output overcurrent protection, and input signal overvoltage protection.
●PWM control module is industrial design, stable and reliable, with anti-static circuit, transient suppression protection, undervoltage protection, interface ESD and over-voltage protection.


Description

Size:PWM Motor Driver Controller 15A
Product Parameters:
1. Power supply voltage: 9V-36V?please note that the power must not be reverse connected or more than 37V, or may burn the module, it is recommended that the power input in series 20A fuse.?
2. Drives without heat sink rated current 15A, rated current 12A ~ 15A needs simple cooling, 15A ~ 20A needs thick heat sink. (simple cooling - such as put a 1mm thick thermal insulation silicone pad under the module, and then 5mm copper column to the module fixed to the wall)
3. Control signal interface (orange) can provide 5V power supply, microcontroller no need additional power supply, the maximum supply current is 0.5A.
4. Control signal high level voltage: 2.0V ~ 5.5V, compatible with 3.3V and 5V TTL level;
Control signal low level voltage: 0V ~ 0.8V, 0V when floating;
Control signal voltage is 5V, the control signal current is 50uA.
5. PWM effective range: 0.1% ~ 100.0%;
PWM signal frequency range: 0 ~ 100KHz (recommend 20KHz);
PWM minimum effective pulse width: 200ns.
6. Operating temperature -25 ? -80 ?.
7. Mounting hole diameter: 3mm

Package Includes:
1*DC Motor Drive Board