parameter:
Maximum voltage: 8V
Minimum voltage: 2.8V
Continuous current: 2A
Short-time maximum current: 5A (within 10 seconds)
Speed control mode: PWM stepless speed regulation, can also be used for dimming
Control mode: potentiometer speed control (clockwise opening, continue to rotate clockwise from 1% to 99% speed)
Duty cycle: 0%-99% (0% position is the state when the leftmost switch of the potentiometer is off)
Self-consumption current when turned on: 0.002A (no current when the governor switch is turned off when not in use for a long time)
Efficiency: Maximum efficiency is as high as 98%.
Volume: length 2.7cm (excluding potentiometer), width 2cm, height 1.4cm
Weight: 10g
* Note that the governor is mainly used for motor speed regulation. If you are using LED dimming, you must ensure that the LED can work normally when it is directly connected to the power supply. That is, the dimming range of the governor is completely extinguished from the LED. The LED is directly connected to the power supply for dimming. If the LED is directly connected to the power supply and will be burnt, the dimming of the dimmer will also burn out. In this case, a current limiting resistor is generally required. If you do not know how much resistor should be connected in series. Contact Customer Service.
If you are using a speed control (dimming) device, we can provide free
Customized service, you can modify the shape of the board according to the customers requirements, install
Way, current and voltage parameters, add other functions, etc.