Speedmaster Wax - Liquid Wax with PTFE - From the same Special formula as the Speedmaster Wax with ease of application. Unlike many other products in the market which is water soluble wax, Speedmaster Liquid Wax formula contains 100% paraffin wax. It is the very same formula as the Speedmaster Wax except in liquid form. Shake well and apply, its that simple. No dirt or grim accumulation, no chains grease tattoo, no maintenance requires while keeping you chain clean and dry. Suitable for both wet and dry condition. Complement extremely well as a maintenance lube for any waxed chain or use it as a standalone dry lube. For best result, DO NOT mix with oil base lube. Each bottle contains 8 Fluid oz or est. 240 mL.
How to apply:
Step 1: It is essential to make sure your chain is oil free in order for the wax to bind to the metal. Clean and remove all dirt and oil before 1st application. If it is a new chain, make sure you strip off all factory lubricant.
Step 2: Shake well and apply liberally. Only apply it on ventilated area, preferably outdoor. If wax solidified, rinse bottle with warm water until wax liquefied.
Step 3: Wipe off excess if need it and let it dry.
How to apply liquid wax to waxed chain:
Do a quick wipe or use any type of degreaser to remove any dirt and grime. Next, repeat Step 2-3.
NOTE:We tried to pack as much as wax content into this formula. As a result, the wax might solidified under low ambient temperature. If this occurs, simply rinse bottle with warm water until the wax liquefied.
CAUTION: Only apply in a ventilated area. This bottle contains chemical that is extremely flammable. Harmful or fatal if swallowed. Keep out of reach of children. Store it in cool and dry place. Always wear protective eyewear and glove when in use.