Feature(may vary by option.)

●【High Performance】The flow range is 1-25L/min, the maximum water pressure is 1.75MPa, the low water pressure starts, the connection is G1/2 inch external thread, and the Hall effect.
●【STABLE SENSOR】There Is An Integrated Hall-Effect Sensor, Which Outputs An Electrical Pulse Every Time It Rotates. The Hall Effect Sensor Is Sealed With The Water Pipe To Keep The Sensor Safe And Dry
●【MATERIAL】: Food Grade Plastic, All Raw Materials Conform To The ROHS Test Standard
●【BROAD APPLICATION】It Can Be Perfectly Used For The Water Flow Switch Control Of Water Heaters, Water Dispensers, Water Purifiers, Vending Machines, Coffee Machines, Flow Measurement Devices, Water Controllers And Other Electrical Appliances.
●【SINCERE PROMISE】We Have Been Always Doing Our Best To Provide Our Customers With The Best Service And Shopping Experience, So Please Feel Free To Contact Us If You Have Any Questions About Our Products

[1pack]

[2pack]

[3pack]

Description

Our products are fine made with nice materials and good workmanship, strict quality control，We are committed to providing you with satisfactory products and look forward to your visit to our division

The flowmeter is light and handy, easy to install. The sealing ring make the connection firm, the sealing performance is good and the problem of water leakage is avoided.

Model number: YF-B7
Interface size: G1/2
Rated voltage: DC3.5~24V
Inside diameter/outside diameter: 13.7mm/20.3mm
Thread length: Teething16mm / Short teeth 10.5mm
Material: Copper
Water pressure resistance: ≤1.75MPa
Output pulse high level：>DC4.7V (input voltage DC5V)
Output pulse duty ratio: 50%±10%
Insulation Resistance ：＞100MΩ
Flow range: 1-25L\Min±3%
Flow pulse characteristics: (11*Q) Q=L/Min±3%
Tightness：Close each hole and add 1.7Mpa water pressure test for 1 minute，No leakage and deformation

If you have any questions when purchasing you can contact us at any time, we will reply to your email within 24 hours and do our best to provide excellent service.