Specification:
Item Type: Electric Bike LCD GD01 Panel
Material: PC
Gross Weight: 194g / 6.8oz
Panel Size: Approx.82 x 48mm / 3.2 x 1.9in(allowable error of manual measurement)
Applicable Handlebar Installation: 22.2mm diameter handlebar
Voltage: 24V 36V 48V (the voltage on the instrument is set by itself)
Interface: 5 pin
Function description:
1. Adopt two way communication protocol;
2. Real time speed display;
3. Kilometer/mile display;
4. Intelligent power display;
5. Headlight control;
6. 3 level adjustment of backlight brightness;
7. 5 gear control;
8. Mileage display;
9. Fault coding display;
10. Promotion mode: 6km/h;
11. Parameter setting.
How to Use:
Fix the LCD display part and button on the handle of the electric bike, and adjust the appropriate visual angle. When the bike is powered off, connect the panel connector with the corresponding connector of the controller. Turn on the power supply, the electric bike and the panel enter the normal operation state, and the panel installation is completed. When the panel is turned off, long press the M key for 3 seconds, the panel will fully display and start working, and turn on the controller power; press and hold the M key for 3 seconds when the machine is turned on. The panel power is turned off and the controller power is turned off. If you do not ride for 10 minutes (the time can be set by the user) and do not operate the panel, the panel will automatically turn off the power. In the shutdown state, the power consumption of the panel and controller is zero.
Package List:
1 x Panel
1 x Instruction
Note:
This instrument adopts No.2 protocol. Please allow error due to manual measurement