[Angle-depth Adjustable]
Description:
Name: Hanging Rack
Material: Aluminum alloy, plastic, stainless steel;
Material: steel, iron, foam
Application: Indoor suspension bicycle
Adjustment: Adjustable inclination RCK054-S; adjustable inclination, depth adjustment (only RCK054-T);
folding: foldable storage
Installation: 4 expansion screws (included)
Accessories: Contains rim straps, which are used to tie the front rim and frame together. Other accessories are options upon order.
Net Weight: The main body is about 0.92kg (RCK054-S); the main body is about 1.05kg (RCK054-S)
Load capacity: 25 kg. But special attention is required: the actual load-bearing is directly related to the installation method and the condition of the wall.
1. Confirm the characteristics of the wall surface before installation, and avoid circuits, gas, water pipes and other pipelines on the wall/inside/behind the wall
2. It must be installed on solid cement walls and solid brick walls; use a suitable drill to drill holes, and the holes are accurate and even.
3. Not suitable for foam partition walls, gypsum boards, hollow brick walls, composite panels.
4. There is no shelter on the wall, and the bicycle tires should be at least 10 cm above the ground.
5. Before hanging the bicycle, be sure to check whether the trailer frame is firmly installed and all screws are fastened in place.
Packing list:
1 set x Hanging Rack
Note:
Different displays may cause the color of the item in the picture a little different from the real thing.
Manual measuring,please allow 1~3mm error,thank you.