Feature

●PTFE coated fiberglass fabric with pressure sensitive silicone adhesive tapes provide superior release properties and non-stick surfaces to allow machinery and equipment to run smoothly and efficiently
●This fiberglass tape provide the solution of hgh temperature,it is used in packaging (heat sealing, shrink wrapping) as a heat resistant release surface placed over heating elements and pressure bars
●This tape maintains durability at high speeds and high temperatures. Frequently used in heat sealers, blister formation and form-fill-seal equipment as well as lining of guide rails, chutes and slides
●This tape maintains high temperature resistance to 500F, The PTFE coating provides a smooth, anti-stick surface,waterproof
●Multipurpose: Impulse Sealer, high-speed sealing machine, food packaging, hot melt machine, motor, high and low voltage electrical products, wire and cable insulation protection, battery manufacturing sewing machine and so. It is high temperature resistance, ,wear-resistant, corrosion-resistant, anti-sticking


Description

Specification :
Thickness: 0.007inch/0.18mm
Width: 2Inch/5cm
Length33 feet /10 Meter
Tape resistant temperature: -148℉~518℉（-100℃~270℃）
Package: 1 pieces teflon tape ,2 inch x 33 feet (PTFE Coated Fiberglass High Temperature )

Wide Application
Our Teflon Tapes fit for virtually all FoodSaver, Weston, Cabellas, Nesco and Seal-A-Meal vacuum sealers, as well as most models of hand / impulse heat sealers.
1)Used for packing food, dairy products, medicine, hot sealing and sticking parts
2)Use the thermal seal of plastic film
3)The surface of the pressure roller used for package dyeing and resin processing
4)Roller surface used for packing adhesive and coating machine
5)Used for sealing the friction surface of feeding hopper and guide

How to Install replacement Tape to work with my machine?
1) Simply remove the tape on your current heating element (make sure to get the residue from the old tape off)
2) Cut your new replacement tape to the correct size.
3) Place over the heating element (under the element if using for an impulse sealer)Smooth out the tape with your finger as you go, to ensure a good bond