Controller description: The wire color definition interface on the controller can be connected to the socket of the accessory to realize the function. For the specific operation, please refer to the wiring diagram and manual.
Specification:
Item Type: Bike Lithium Battery Modification Kits
Material: Aluminum Alloy + ABS
Size:
Controller Box: Approx. 82 x 53 x 31mm/3.2 x 2.1 x 1.2in
Meter: Approx. 95 x 65mm/3.7 x 2.6in
Controller Rated Voltage: DC 36V/48V
Controller Rated Current: 7A
Controller Maximum Current: 15±1A
Controller Speed Setting: 1-4.2V
Controller Brake Input: Low Level
Controller Low Voltage : DC 30/40±0.5V
Applicable Brushless Motor Power: 250W, 350W
Connector Type: Full Waterproof Connector
1 for 2 Line Description: One End is Connected to the Controller, the Other End is Connected to the Meter and Dial
Controller Line Definition:
1. Red, Black Single Wire: Power Wire
2. Black Single Large Wire (9pin): Motor Wire
3. Black Single Wire (9pin): 1 to 2 Wires
4. Black Single Wire (3pin): Pas Power Sensor Wire
Package List:
1 x Controller
1 x Meter
1 x Instrument Mounting Bracket
4 x Instrument Mounting Bracket Gasket
2 x Instrument Mounting Bracket Screws
1 x Instrument Manual
1 x Throttle Dial
1 x Power Assist Sensor
1 x Controller Wiring Manual
1 x 1 for 2 Connecting Line
Note:
1. Please allow some errors due to manual measurement.
2. Note that the kit modification must be fully waterproof