1. 100% brand new and high-quality.
2. The measuring range is 0-100mA which is suitable for most scenarios.
3. High accuracy,the resolution ratio is as precise as 0.1A and the accuracy grade is ±3.0%FS.
4. High sensitivity and few interference was generated if outer electric field is near.
5. High dielectric strength,more safety and let you rest assured.

Specification:
Features:
100% brand new and high-quality.
The measuring range is 0-100mA which is suitable for most scenarios.
High accuracy,the resolution ratio is as precise as 0.1mA and the accuracy grade is ±3.0%FS.
High sensitivity and few interference was generated if outer electric field is near.
High dielectric strength,more safety and let you rest assured.
Specification:
Detection modeopen-and-close CT, on-line installation is particularly convenient.
Power source9VDC ± 1VDC (or other power supply: ± 12VDC ± 1VDC or ± 5VDC)
Working current20mA max
The opening and closing dimension10 mm (the core can be pierced through a wire of less than 10 mm)
Quantity0.0mA ~ 100mA DC
Discriminant power0.1 mA DC
Accuracy ± 3.0% FS (23 ℃ ± 2 ℃,70% below, conductor in the center of clamp)
Turn ratio1:800
output 25mV/ 1mA, that is,0 ~ 100mA corresponding output 0 ~ 2.5V (± 12VDC power supply: 50mV/ 1mA)
Response speed2 times per second
Output line headbrown line _ power input is positive;Yellow line _ alarm control end (high potential light);Blue Line _ Output is positive;Black line _ common ground end (power input negative and output negative, can be shorted with outer )
Output line length100mm
Geomagnetic interferenceabout 3mA
The position of the conductorat the center of the opening and closing opening
Line voltageDC 600 V below line test
Working temperature and humidity-10 ℃ ~ 45 ℃;Under 80%
Storage temperature and humidity-10 ℃ ~ 60 ℃;Under 70%
Insulation strengthAC 2 kV/ rms (between core and