[1]
[2]
[5]
|
|
|
---|---|---|
The Compression Router BitThe compression cutters are designed with both up and down-cut flutes. The top portion of the length of cut, closest to the shank, has a left hand spiral, forcing chips down. when using the compression bit, you must ensure the first pass is below the upcut portion of the bit, or you will get results similar to just cutting with an upcut bit; Using a ramp in, plunging into the material over a distance instead of all at once, and a lead in, starting outside the design to get to the pass depth, it will ensure that the entire piece is perfectly clean on the top and bottom. Compression bits are designed to cut in a single pass, however, if your machine cannot handle that depth of cut you can cut in multiple passes, as long as that first pass is below the upcut portion of the bit. |
Spiral TextureBetter Wear Resistance. |
2 Flute Rotating Cutter HeadWear-resistant and durable. |
|
|
|
---|---|---|
Specification:
|
Features
|
Independent PackagingAvoid damage during transportation |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
Compression Bit | Single Flute (O Flute) Spiral End Mill | 2 Flute UP Cut Router Bit | Up Down Compression Bit | CNC Spoilboard Surfacing Router Bit | Neon Light Strip Slotting Bits | |
Item Shank | 1/4" | 1/4" | 1/4" | 1/4" | 1/4" | 3/8" |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
Titanium Coat Carbide End Mill | 1/8 Inch Straight Router Bits Set | Carbide Square End Mill for Aluminum | Flush Trim Router Bit Set | CNC Single Flute Router Bits | Downcut Bit | |
Shank Diameter | 1/8" | 1/8" | 1/8" | 1/4" | 1/8" | 1/8" |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
BT30 ER32-45L Balance Collet Chuck | ISO30 ER32-45L Balance Collet Chuck | ISO30 Tool Holder Clamp | ER20 Spring Collet Set | ER32 Collet Set | ISO20 Tool Holder Clamp | |
Model Number | BT30 ER32-45L | ISO30 ER32-45L | ISO30 | ER20 | ER32 | ISO20 |