Forensics Detectors offers sensitive Carbon Monoxide Meters and Analyzers. Made for home, business, and industrial use for inspectors, industrial hygienists, air quality assessors, utility workers, refinery workers, firefighters, technicians, contractors, and maintenance engineers.
This is the ultimate carbon monoxide analyzer with a built-in pump allowing for super-fast detection & response, point probe sampling, and continuous monitoring. Perfect for tracking the build-up of carbon monoxide in indoor environments and detecting any CO leaks from a heat exchanger. High precision for accurate measurements and robust for fieldwork, inspections, occupational safety, industrial, and environmental applications.
Have the highest confidence in your gas detection accuracy. Possible only with best calibration practices to USA NIST Traceable Sources. Calibration qualified in the Forensics Detectors laboratory, located in Los Angeles, California, USA.
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|
FD-90A-CO | FD-90A-CO-PUMP | FD-103-CO | FD-103-CO-LOW | FD-600-CO | |
Gas Detected | Carbon Monoxide (CO) | Carbon Monoxide (CO) | Carbon Monoxide (CO) | Carbon Monoxide (CO) | Carbon Monoxide (CO) |
Range / Resolution | 0-1000ppm / 1ppm | 0-1000ppm / 1ppm | 0-1000ppm / 1ppm | 0-100ppm / 0.1ppm | 0-1000ppm / 1ppm |
Response Time | <30 seconds | <30 seconds | <60 seconds | <60 seconds | <20 seconds |
Accuracy | better than 5% F.S. | better than 5% F.S. | better than 5% F.S. | better than 5% F.S. | better than 5% F.S. |
Alarms with LED, Vibration, Buzzer | ? | ? | ? | ? | ? |
Pump & Probe | ? | ? | |||
Built-in Pump | ? | ||||
Probe Length | 8.6-inch | 4ft (telescopic) | |||
Calibration and Alarm Adjustment | ? | ? | ? | ? | ? |
Special Features | Best General Purpose CO Meter | CO Meter with pump for point sampling and analysis | Very Robust. Water-proof IP67, Shock-proof | Super Sensitive 0.1ppm Resolution, Water-proof IP67, Shock-proof | Most Professional for Home Inspectors and Assessors with Advanced Features |
Gas Detected | Carbon Monoxide (CO) |
Detection Range | 0 - 1000 ppm with 1 ppm resolution |
Response Time | < 20 seconds |
Accuracy | better than 5% F.S. |
Calibration Standard | USA NIST Traceability |
Operating Temperature | 14F - 122F |
Operating Humidity | < 95 %RH |
Working Battery Time | > 10 hours |
Power Source | DC 3.7V Li-on battery, 3200 mAh |
Sensor Life | 2-3 years |
Analyzer Dimensions & Weight | 5.1 in × 2.6 in x 1.2 in inches & 14oz |
Explosion-proof / Ingress | Ex ib IIB T4 Gb / IP65 |