Feature(may vary by option.)

●High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tools cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
●Cost-Effective: Coming with 7pcs of the 3-flute square end mills, Shank Diameter: 4mm, Cutting Diameter: 1/1.5/2/2.5/3/3.5/4mm, Cutting Length: 3/5/7/8/11/12/13mm, Overall Length: 50mm.
●Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal; Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting.
●Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy; Attain excellent production rates thanks to the strong tooth with double relief angles.
●Wide Compatibility: Genmitsu SN07A Square End Mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.

[4mm Shank-7pcs]





Description

bannerbanner
1111

Genmitsu SN07A 7pcs 3-Flute Square End Mill

Content

  • 1 x 3-Flute Square End Mill (Cutting Diameter: 1mm; Cutting Length: 3mm)
  • 1 x 3-Flute Square End Mill (Cutting Diameter: 1.5mm; Cutting Length: 5mm)
  • 1 x 3-Flute Square End Mill (Cutting Diameter: 2mm; Cutting Length: 7mm)
  • 1 x 3-Flute Square End Mill (Cutting Diameter: 2.5mm; Cutting Length: 8mm)
  • 1 x 3-Flute Square End Mill (Cutting Diameter: 3mm; Cutting Length: 11mm)
  • 1 x 3-Flute Square End Mill (Cutting Diameter: 3.5mm; Cutting Length: 12mm)
  • 1 x 3-Flute Square End Mill (Cutting Diameter: 4mm; Cutting Length: 13mm)

Specification

  • Material: Tungsten Carbide Steel Alloy.
  • Coating: Nano Blue Coating
  • Shank Diameter: 4mm
  • Cutting Diameter: 1/1.5/ 2/2.5//3.5/4mm
  • Cutting Length: 3/ 5/7/ 8/11/12/13mm
  • Overall Length: 50mm

11

22

33

High Quality

The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tools cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Applicable Materials

High feed U-type design makes these cutters ideal for working with aluminum and copper alloy; Attain excellent production rates thanks to the strong tooth with double relief angles.

Cost-Effective

Coming with 7pcs 3-flute square end mills, Shank Diameter: 4mm, Cutting Diameter: 1/1.5/2/2.5/3/3.5/4mm, Cutting Length: 4/4/5/6/8/10/12mm, Overall Length: 50mm.

Product guides and documents

Comparison Chart (PDF)
User Guide (PDF)