Specification:
Item Type: High Frequency Induction Heater
Material: ABS, Brass
Uses: Industrial quenching and annealing
Host Voltage: 50V
Package List: 1 x Driver 1 x Heating Tube
Note: 1. No load power supply is not allowed to be turned on under any circumstances (no load means that the output port does not have any load). When the power supply is turned on under no load state, high frequency noise will be emitted from the board surface, which will cause the MOS tube to be completely damaged and cannot be repaired.2. It must be noted that when using switching power supply, because high?power switching power supply generally has a slow start function, that is, when it starts, the output voltage rises slowly, if the voltage is turned on 11V in the induction heating circuit, the circuit will not vibrate, because Insufficient voltage to turn on 2 MOS tubes combustion components at the same time. Therefore, it is necessary to wait until the switching power supply voltage stabilizes before proceeding. Induction heating circuit, an air switch can be connected between the power supply and the motherboard3. When the heating machine is working, the heating coil will generate high heat. It is recommended to use water cooling to cool the heating coil to avoid damage to the motherboard due to high temperature.