ETCR9100 High and Low Voltage Clamp Ammeter AC 0.00mA~600A Φ33mm
Notice:
The standard package dont include batteries.Because,the international air shipping forbid to ship liquid,powder and batteries,we can not put them in the package box.Hope you can understand buy them in your local store or supermarket.
At the same time, please forgive us that we are unable to provide the English user manual. If you need it, please contact the customer service after purchase.
Thanks for your support!
Function
High voltage AC current measurement, low voltage AC current, current leakage measurement, online AC current measurement
Power Supply : DC6V alkaline LR03×4)
Test Mode : Clamp CT, integral approach
Display Mode : 4 bit LCD display, with backlight function
LCD Dimension : 47mm×28.5mm
Meter Dimension : LWH: 68mm×245mm×40mm
Clamp Dimension : Ф33mm
Sampling Rate : 2 times/second
Measurement Scope : 0.00mA~600A (50/60Hz automatic)
Resolution : 0.01mA
Shift : 0.00mA~600A automatic shift
Accuracy :
(23℃±5℃, below 70%RH)
0.00mA~100.0A: ±1%±5dgt
100.0A~600.0A: ±2%±5dgt
Line Voltage : Below 60KV line test (with 5 insulation rods operation)
Data Memory : 99 sets, memory process is shown by MEM , full storage is shown by blinking FULL
PEAK value maintaining :
Automatically maintain the high test value, in usual testing mode, press keyHOLD till the lighting of PEAK, that is, start PEAK to maintain this function.
Over-range overflow function: shown in "OL A"
Automatic Shutdown : 15 minutes after boot
Battery Voltage : When battery voltage is lower than 4.8V, battery voltage is shown in low symbol to remind battery replacement
Meter Weight
Detector: 335g (with battery), the total mass of meter: 2.5kg (including insulation rod and battery)
Insulation Rod Dimension : φ32mm