Feature

●Brass/Stainless Steel/Wood
●?? Vintage Engine: This is a vertical twin-cylinder gasoline engine with a vintage look and a mechanical governor that stabilizes the engine at a set RPM.
●?? Innovative Design: The engine is cooled by water circulation with radiator tank, water pump and fan. It is equipped with an ignition system and is powered by 4.5V (3 AA batteries).
●?? Starting steps: (1) Check the engine wiring under the wooden base, then connect the fuel tank and fuel lines and install 3 AA batteries (4.5V). (2) Fill the tank with 95 gasoline. After filling, rotate the flywheel on the right side of the engine clockwise several times to allow the fuel mixture to fully enter the cylinder to ensure that there is no air. (3) Turn on the power switch, then start the right side of the engine by rotating the flywheel quickly clockwise.
●?? Attention: (1) After the engine is working, you need to add some water in the water tank, because the water will enter the cylinder to fill the space after working, and the water path in the cylinder will return to the water tank through the pipe. (2) If the ignition is normal, the cylinder compression is normal, and the machine does not start properly, the carburetor needle most likely needs to be adjusted.
●(3) After tightening the carburetor needle, loosen it 1/4 turn and start the flywheel to bring the gasoline to air mixture ratio to that of normal operation. (4) When the machine stops working, turn off the power. (5) This is an ideal gift for machinery fans and modeling fans, and it will accompany you through your leisure time. It can be used as a collectors item as well as a Christmas and birthday gift.


Description

?? Specifications:
 .Material: Brass/Stainless Steel/Wood
 .Art. No.: H74
 .Integrated Dimensions: 200 x 120 x 210mm
 .Engine Dimensions: 180 x 180 x 100mm
 .Wooden Base Dimensions: 200 x 120 x 30mm
 .Weight: 2500g
 .Displacement: 5CC
 .Cylinder Diameter: 13mm
 .Stroke: 20mm
 .Ignition Unit Power Voltage: 4.5V
 .Starting Mode: External Force (Electric Drill) or Manual
 .Product Dimensions: 20 x 12 x 21cm
 .Product Weight: 2500g
 .Package Dimensions: 25 x 25 x 25cm
 .Package Weight: 2800g
 .Packing: Box

?? Package Including
 .1 x Engine
 .1 x Manual