Specification:
Item Type: Paint Film Meter
Material: ABS
Model: LS233
Color: As Picture Shown
Application: For Measuring The Thickness Of Paint Film And Coating
Tip: Fixed Rubine
Principle Of Measurement: Fe: Hall Effect /NFe: Eddy Current
Probe Type: Built In Integral
Measurement Range: 0.0-2000μm
Resolution:
0.1μm: (Oμm-99.9μm)
1μm: (100um-999μm)
0.01mm: (1.00mm To 2.00mm)
Measurement Mode: "Fe" "NFe" "Fe/NFe"
Measurement Accuracy: ≤±(3% Display Value + 2um)
Unit: Um/Mil
The Measurement Interval: 0.5s
Minimum Measuring Area: Diameter=25mm
Minimum Radius Of Curvature Convex: 5mm/Concave: 25mm
Minimum Substrate Thickness Fe: 0.2mm/NFe: 0.05mm
Display:
Front: 128 x 48 Dot Substrate LCD
Top: 128×64 Dot Substrate Organic Light Emitting Diode
Power Supply: 2Pcs 1.5V AAA Alkaline Batteries(Not Included)
Operating Temperature Range -40°C - 50°C
Storage Temperature Range -50°C - 60°C
Host Size: 100x60x24mm/3.9x2.4x0.9in
Package List:
1 x Paint Film Meter
1 x The Iron Substrate
1 x The Aluminum Substrate
1 x Standard Piece
1 x Receive Case
1 x Storage Bag
1 x Hang Rope
1 x Manual
Note:
1. The measurement shall be point contact. It is strictly forbidden to slide the probe on the surface of the tested object.
2. When measuring, the probe should be kept in the center of the point to be measured, and the probe periphery should not be suspended outside the surface to be measured.
3. Keep away from strong magnets (magnets, speakers, etc.) and strong electromagnetic fields (transformers, induction cookers, etc.).
4. It is recommended to zero the instrument before use.
5. Ensure that the surface of the object to be measured is clean. Dust and may affect the measurement accuracy.
6. Replace the battery when "low battery" is displayed.