Feature(may vary by option.)
●FOR AIR PUMPS: Air coupler fast connector is used for compressors, air pumps and some machines, etc., very practical.
●WIDELY USED: Widely used in engineering projects such as factories, automation equipment, auto repair, electronics and electrical engineering.
●WIDELY USED IN ENGINEERING PROJECTS: Widely used in engineering projects such as factories, automation equipment, auto repair, electronics and electrical engineering
●EASY TO INSTALL: Pneumatic manifold air distribution block is easy to install, no air leakage, possess good air tightness.
●HIGH PRESSURE RESISTANCE: Working pressure from 0~0.9Mpa(0~0.92kfg/cm²), pressure resistance is 1.0MPA (10kgf/cm²), possess high pressure resistance
[SY30-02-3F]
[SY30-02-4F]
[SY30-02-5F]
Description
Specification:
Item Type: Pneumatic Manifold Air Distribution Block
Material: Aluminum
Pressure Resistance: 1.0MPA(10kgf/cm²)
Working Pressure: 0~0.9Mpa(0~0.92kfg/cm²)
Adaptation Temperature: 0~60℃
Model Total Length(approx.) Positions/Holes Length x Width(approx.) Main Air Pipe Branch Branch Center Hole Diameter Mounting Hole Diameter Vertical Mounting Hole Center Spacing Horizontal Mounting Hole Center Spacing
SY30-02-3F 106mm / 4.17in 3 Position 5 hole 30 x 30mm / 1.18 x 1.18in G1/2 (approx.20mm / 0.79in) G1/4 (approx. 12mm / 0.47in) Approx.32mm / 1.26in Approx.5.2mm / 0.2in Approx.20.5mm / 0.81in Approx.32mm / 1.26in
SY30-02-4F 138mm / 5.43in 4 Position 6 hole Approx.64mm / 2.52in
SY30-02-5F 170mm / 6.69in 5 Position 7 hole Approx.96mm / 3.78in
Packing List:
1 x Pneumatic Manifold Air Distribution Block
Notice:
1. Do not unplug and insert the air pipe frequently during the use of the connector, which will affect the service life of the connector and air pipe.
2. The pipe inserted into the joint needs to be inserted to the bottom of the joint to avoid the possibility of air leakage.
3. When pulling out the air pipe, first confirm that there is no pressure in the tube, press the end cap of the joint to the end and pull out the air pipe.