Specification:
Item Type: Pneumatic Manifold Block Splitter
Material: Aluminum
Pressure Resistance: 1.0MPA (10kgf/cm)
Working Pressure: 0~0.9Mpa(0~0.92kfg/cm²)
Adaptation Temperature: 0~60℃
Model: Total Length (Approx.); Way Number Holes Number; Length x Width (Approx.); Thread Specifications; Intersection Center Spacing(Approx.)
AL-2: 65mm / 2.56in; 2 Way 5 Holes; 20x20mm / 0.80x0.80in; G1/4(12mm); 30mm / 1.18in
AL-3: 95mm / 3.74in; 3 Way 6 Holes; 20x20mm / 0.80x0.80in; G1/4(12mm); 30mm / 1.18in
AL-4: 125mm / 4.92in; 4 Way 7 Holes; 20x20mm / 0.80x0.80in; G1/4(12mm); 30mm / 1.18in
AL-5: 155mm / 6.10in; 5 Way 8 Holes; 20x20mm / 0.80x0.80in; G1/4(12mm); 30mm / 1.18in
AL-6: 185mm / 7.28in; 6 Way 9 Holes; 20x20mm / 0.80x0.80in; G1/4(12mm); 30mm / 1.18in
AL-7: 215mm / 8.46in; 7 Way 10 Holes; 20x20mm / 0.80x0.80in; G1/4(12mm); 30mm / 1.18in
AL-8: 245mm / 9.65in; 8 Way 11 Holes; 20x20mm / 0.80x0.80in; G1/4(12mm); 30mm / 1.18in
Package List:
1 x Pneumatic Manifold Block Splitter
Note:
1. Do not unplug and insert the gas pipe frequently during the use of the connector, which will affect the service life of the connector and gas pipe.
2. The pipe inserted into the joint needs to be inserted to the bottom of the joint to avoid the possibility of air leakage.
3. When pulling out the gas pipe, first confirm that there is no pressure in the tube, press the end caps of the joint to the end and pull out the gas pipe.