Feature(may vary by option.)

●Pure Aluminum Material: Made of pure aluminum material, rust prevention, not easy to deform, and more durable
●Convenient Installation: This is convenient installation of the air distribution exhaust, no air leakage, good sealing
●Application: Widely used for engineering projects such as factories, automation equipment, auto repair, electronics and electrical engineering
●Simple Structure: Adopts the simple structure, compact size, lighter weight, easy to install and unload
●Compatible Equipment: Manifold splitter is mainly used for air pumps, cylinders, compressors, vacuum engines, etc.

[AL-8]

[AL-6]

[AL-7]

[AL-4]

[AL-5]

[AL-2]

[AL-3]

Description

Spec:
Item Type: Pneumatic Manifold Block Splitter
Material: Aluminum
Pressure Resistance: 1.0MPA (10kgf/cm)
Working Pressure: 0~0.9Mpa(0~0.92kfg/cm²)
Adaptation Temperature: 0~60℃
Model Total Length (Approx.) Way Number Holes Number Length x Width (Approx.) Thread Specifications Intersection Center Spacing(Approx.)
AL-2 65mm / 2.56in 2 Way 5 Holes 20x20mm / 0.80x0.80in G1/4(12mm) 30mm / 1.18in
AL-3 95mm / 3.74in 3 Way 6 Holes 20x20mm / 0.80x0.80in
AL-4 125mm / 4.92in 4 Way 7 Holes 20x20mm / 0.80x0.80in
AL-5 155mm / 6.10in 5 Way 8 Holes 20x20mm / 0.80x0.80in
AL-6 185mm / 7.28in 6 Way 9 Holes 20x20mm / 0.80x0.80in
AL-7 215mm / 8.46in 7 Way 10 Holes 20x20mm / 0.80x0.80in
AL-8 245mm / 9.65in 8 Way 11 Holes 20x20mm / 0.80x0.80in

packing list:
1 x Pneumatic Manifold Block Splitter

Note:
1. Do not unplug and insert the gas pipe frequently during the use of the connector, which will affect the service life of the connector and gas pipe
2. The pipe inserted into the joint needs to be inserted to the bottom of the joint to avoid the possibility of air leakage
3. When pulling out the gas pipe, first confirm that there is no pressure in the tube, press the end caps of the joint to the end and pull out the gas pipe