1. Perfect Sealing: The return main has a double EPDM O to reduce noise to a very low and double protection for safety performance.
2. Individual Control: Each branch of the return water main is equipped with a temperature control valve that can be switched on and off via a handle for the branch in which it is located.
3. Stainless Steel: The stem of the return main is made of stainless steel, which effectively reduces friction and prevents scaling.
4. Easy Installation: inner wall with no roughness, main pipe diameter G1in, easy and quick installation with its own thickened bracket.
5. High Accuracy: Our valves are highly accurate meters with scale display, stable quality and long service life.
Spec:
Item Type: Radiant Heat Manifold
Material: Stainless steel
Finish: Brushed finish
Nominal Pressure: PN≤1.2Mpa
High and Low Temperature Resistance: -20℃-110℃
Forming Process: Using 1700/T forging and tempering process
Intelligent Structure: Visible adjustable upper meter, lower intelligent
Product Thread: Thread standard in line with ISO228 standard
Working Medium: Water, non corrosive liquids
Test pressure: Mpa0.8-1.0
Product Structure: Inlet water is spiral soft EPDM , return water is intelligent temperature control valve spool
Branch Pipe: 1216
How to Use:
Instructions for use of the water distributor.
1. Open the inlet and return valves, mains water into the water distributor, remove the red sheath of the meter and rotate up the adjustment (collector spool open).
2. Automatic exhaust loose small cap, let the exhaust to be in the automatic state, discharge the air inside the manifold.
3. Test the system in the fully open state to see if there are any safety leaks, the system test time is 24 hours, (pressurization pressure stability value 1.0?1.2MPa).
4. 24 hours of pressure testing, check whether there is water seepage or dripping from each component connection point. If